Richw911 Question for you Re temp sensor

[theshrew]

I'm being a bit of a tard !

Re replacing the temp sensor how does the plug come off ?

I can't see any of the normal clips etc and don't want to give it some welly just to pull it off just in case I break it. Am I missing something as its pretty dark in my garage and my light has blown ugh.

Hope you can help

Cheers

[daz veedub]

come on rich where are u 

[scarr89]

Is it one of those gay clips that you have to push in slightly before pulling off? 

[cullygti]

most of the ones on my engine are them gay ones as you put it 

[daz veedub]

 

[Steve_PD]

Push the plug in a little to break the seal then use your finger nail (or small hex key) to lift the tap and pull the plug off

[cullygti]

wtf are you doing steve he asked for rich not you 

[Steve_PD]

Rich is MIA for the past few days.
And if you must Ill change the thread name

[cullygti]

Rich is MIA for the past few days.
And if you must Ill change the thread name

  

[theshrew]

Push the plug in a little to break the seal then use your finger nail (or small hex key) to lift the tap and pull the plug off

Thanks for the advice but I'm not with you on the lift the tap bit.

From what I could see there is nothing to push in etc on the plug like you would normally expect.