« previous next »
Pages: [1]

Author Topic: Undertray removal  (Read 1569 times)

Offline Joewb84

  • Not said much yet
  • **
  • Posts: 25
Undertray removal
« on: 10 July 2012, 19:06 »
Hi, hope someone can help.  I've got a mk4 gti turbo.

Part of my undertray had broken and was hanging down.  I have removed the central piece but the broken section is on the drivers side.  I have removed all the screws underneath that I can see and the tray seems to be loose but I can't get it off.  Do I need to remove anything else or should I just yank it out?  Don't want to pull it too hard in case I break anything.
Logged

Offline Steve_PD

  • Serious forum addict
  • *
  • Posts: 7,121
  • Cruising around in a Land Cruiser
Re: Undertray removal
« Reply #1 on: 10 July 2012, 19:56 »
Its now held on by a couple star shaped clip up in the wheel arch. use a screw driver to prise the clips off then give it a good yank and it should come out.
Logged
I often wonder why people never expect sarcastic comments from me - they're the only reason I speak...

Offline JC

  • 10k hero
  • *
  • Posts: 13,429
  • Back in the North.
Re: Undertray removal
« Reply #2 on: 10 July 2012, 20:00 »
or just use some long grass and reverse gear  :lipsrsealed:
Logged

Offline Joewb84

  • Not said much yet
  • **
  • Posts: 25
Re: Undertray removal
« Reply #3 on: 10 July 2012, 20:48 »
Can you get the star shaped clips off without taking loads of other parts out to get to them?  I can see one of them from under the car.  Can you get it off from underneath or do you need to get to it from above?

I did give some thought into driving it over something to knock it off but I don't think that's a long term solution, lol.
Logged
Pages: [1]
« previous next »