« previous next »
Pages: [1] 2

Author Topic: Lambda Sensor  (Read 1408 times)

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Lambda Sensor
« on: 18 June 2012, 12:42 »
Do the 1.8T just have the 1x lambda sensor  :undecided:
I have been needing to do mine for a while and am getting everything else ready for the FMIC and K03s  :evil:
Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline Xtrhardcore

  • Here all the time
  • ****
  • Posts: 404
  • Mk3 Gti 2.0 8v MoreDoor
Re: Lambda Sensor
« Reply #1 on: 18 June 2012, 12:45 »
iirc i think it has one in front of the cat and one behind? could be wrong though  :embarassed:
Logged
Mk4 Gti - Gone but not forgotten!

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: Lambda Sensor
« Reply #2 on: 18 June 2012, 12:46 »
mine is throwing one code, time to find out which is knackered then  :smiley:
Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline Granta Gti

  • I live here
  • *****
  • Posts: 774
Re: Lambda Sensor
« Reply #3 on: 18 June 2012, 13:54 »
Our ARZs have the 2 sensors. What's the code?
Logged

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: Lambda Sensor
« Reply #4 on: 18 June 2012, 17:06 »
Cant remember the code it was picked up while getting it remapped and recommended to be changed and that was ages ago, car gets used about 100 miles a month if that so not that rushed for doing it
Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Lambda Sensor
« Reply #5 on: 18 June 2012, 21:20 »
I have a AUQ and it has pre and post cat lambda sensors, easy to check have a look underneath floor just about in line with the seat and you will see a black box, see if you one or 2 wires going into it.
Logged

Offline shaft69

  • I live here
  • *****
  • Posts: 1,790
Re: Lambda Sensor
« Reply #6 on: 18 June 2012, 22:27 »
If looking for after cat one have one done 100mile bosch selling if req'd, Misdiagnosis so stuck with it.
Logged
MK4 1.8t bored/stroked 2.0lt AEG crank, 83mm supertech pistons, intergrated rods, ACL race brgs, Flowed large port head, Supertech valves, All ARP bolts, GTX2871r turbo, Tial wastegate, 3" pipewerx dp, REVO stage 3 tune, Direct port water meth, MORE TO COME!!! Ready to go racing
Owner of bndynamix ltd. BMW and mini specialist
184 Wallgate, Wigan
WN3 4AL
07966492823.

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: Lambda Sensor
« Reply #7 on: 19 June 2012, 08:48 »
If you have 2 lambda are the front and back not the same fitting/type
Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline rio_gti

  • I live here
  • *****
  • Posts: 2,298
  • "i'm not spending any money on it" Got a Hybrid!
Re: Lambda Sensor
« Reply #8 on: 19 June 2012, 09:05 »
I had this problem they are both different they have different connectors on them too!!! And when trying to find the correct part no about 5 different ones come up!!!
Logged


2000 GTI 1.8t ARZ, S2000 filter, DSG intake, Forge 007 dv, Catch can, R-tech custom remap, 3" Supersize Silicone TIP, Powerflex dog bone, 'The Beast' FMIC, Ultimate delete, LCR fuel pump, 3" Turbo back, K03 hybrid, Ported Manifold, S3 injectors, 80mm maf = 280bhp 270lbft :evil:

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: Lambda Sensor
« Reply #9 on: 19 June 2012, 13:33 »
Do you have the part numbers then or where you got them?
I only think that one of them is gone, so other than process of elimination findout out which has gone  :sad:
Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)
Pages: [1] 2
« previous next »