« previous next »
Pages: [1]

Author Topic: rubber blanking groumet  (Read 1015 times)

Offline Ray_Ray280

  • GTI forum regular
  • ***
  • Posts: 111
rubber blanking groumet
« on: 12 June 2012, 15:33 »
Hello,

I want to de wiper the rear of my golf does anyone know the size of the hole?


thanks

Ray
Logged

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: rubber blanking groumet
« Reply #1 on: 12 June 2012, 15:40 »
I'm interested in this too if someone knows   :smiley:
also what sealant is best to use behind it
Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: rubber blanking groumet
« Reply #2 on: 12 June 2012, 15:53 »
24mm grommet (you can get a mixed packet in halfords really cheap) and no sealant needed.
Logged

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: rubber blanking groumet
« Reply #3 on: 12 June 2012, 16:03 »
Quote from: Wayne on 12 June 2012, 15:53
24mm grommet (you can get a mixed packet in halfords really cheap) and no sealant needed.

No sealant = some pleb pulling it off  :grin:
Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline DunnDeal12

  • Limited
  • I live here
  • *
  • Posts: 704
Re: rubber blanking groumet
« Reply #4 on: 12 June 2012, 16:20 »
Logged

Offline Dalo Harkin

  • I live here
  • *****
  • Posts: 2,070
Re: rubber blanking groumet
« Reply #5 on: 12 June 2012, 17:02 »
Looks smart, may have to purchase one  :smiley:
Logged
ARZ K03s, Oettinger Side Skirts, R32 front, Carbon stage 2, Forge 007p (yellow spring), Forge Actuator (yellow spring), Pipercross panel filter with DSG parts, N249 and N112 deleted, SAI deleted, Carbon canister deleted, Rear wiper deleted, Long Life turbo back custom exhaust with 200 cell sports cat, VR6/G60 clutch kit, Creation Motorsport TIP, Catch can, 'Wellycooler', K04 charge pipe, S3 ported inlet manifold - looks pretty standard on the outside though :)

Offline Ray_Ray280

  • GTI forum regular
  • ***
  • Posts: 111
Re: rubber blanking groumet
« Reply #6 on: 12 June 2012, 17:28 »
i brought some groumets from halfords for £1.59 now does anyone know how to remove the rear wiper??
Logged

Offline dom

  • 10k hero
  • *
  • Posts: 10,084
  • Back in a Mk4
Re: rubber blanking groumet
« Reply #7 on: 12 June 2012, 17:35 »
Quote from: Ray_Ray280 on 12 June 2012, 17:28
i brought some groumets from halfords for £1.59 now does anyone know how to remove the rear wiper??

Pop the washer cover off, undo the nut and the wiper arm will come off with a little wiggling.

Open the boot, undo the 2 screws inside the grab handles on the inside of the boot. You'll be able to pull the entire black plastic cover off the inner boot lid.

Disconnect the plug for the wiper mechanism and the washer pipe, then it's 3 screws to remove the entire mechanism which will then pull out from the inside. Make sure you block the washer pipe with something :wink:
Logged

Offline Ray_Ray280

  • GTI forum regular
  • ***
  • Posts: 111
Re: rubber blanking groumet
« Reply #8 on: 12 June 2012, 17:45 »
awesome cheers Dom gives me something to do tomorrow
Logged

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: rubber blanking groumet
« Reply #9 on: 12 June 2012, 21:56 »
Quote from: dom069 on 12 June 2012, 17:35
Disconnect the plug for the wiper mechanism and the washer pipe, then it's 3 screws to remove the entire mechanism which will then pull out from the inside. Make sure you block the washer pipe with something :wink:

I would also recommend pulling the pipe off the bottle under the bonnet as well.
Logged
Pages: [1]
« previous next »