Author Topic: HELP.. CLUTCH RELATED ISSUE!!  (Read 3760 times)

Offline Bandit127

  • Here all the time
  • ****
  • Posts: 443
Re: HELP.. CLUTCH RELATED ISSUE!!
« Reply #10 on: 03 June 2012, 19:18 »
LOL - the release lever prongs are playing on the pressure plate springs like Liberace on the ivories...  :laugh:




Offline GUMBALL3000

  • Not said much yet
  • **
  • Posts: 90
Re: HELP.. CLUTCH RELATED ISSUE!!
« Reply #11 on: 03 June 2012, 19:27 »
Ok.. What could be causing this?? or has something been put on wrong?

Gavv8

  • Guest
Re: HELP.. CLUTCH RELATED ISSUE!!
« Reply #12 on: 03 June 2012, 19:28 »
I'd say, the lack of a functioning release bearing.

Offline GUMBALL3000

  • Not said much yet
  • **
  • Posts: 90
Re: HELP.. CLUTCH RELATED ISSUE!!
« Reply #13 on: 03 June 2012, 19:38 »
right so it release bearing the same thing as the thrust bearing.. where is this on my model as its not on the input shaft.. It isthe new clutch thats made this problem worse


Offline Bandit127

  • Here all the time
  • ****
  • Posts: 443
Re: HELP.. CLUTCH RELATED ISSUE!!
« Reply #15 on: 03 June 2012, 19:49 »
It is possible that the release bearing is still in there. It would have come away with the gearbox - attached to the release lever. You may not have noticed it because the rest of the clutch is on the engine side.

The symptoms you describe are classic for a knackered release bearing.

If the clutch is actually working (i.e. you can select first and drive away) it must still be in there. Liberace can thankfully stay in heaven...


Offline GUMBALL3000

  • Not said much yet
  • **
  • Posts: 90
Re: HELP.. CLUTCH RELATED ISSUE!!
« Reply #16 on: 03 June 2012, 19:54 »
Yeah it still drives fine.. gearbox is a little stiff though.. so could this just need a new release bearing not the whole clutch comin off again?? Is it the fact that i have fitted a new clutch and all it has done is amplified the problem?? will it still be ok to drive untill i can get it all apart again to replace the release bearing if i can find where it goes?

Gavv8

  • Guest
Re: HELP.. CLUTCH RELATED ISSUE!!
« Reply #17 on: 03 June 2012, 20:30 »
Not sure that's such a good idea.

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: HELP.. CLUTCH RELATED ISSUE!!
« Reply #18 on: 03 June 2012, 20:33 »
will it still be ok to drive untill i can get it all apart again to replace the release bearing if i can find where it goes?

I would not be risking it.

Offline GUMBALL3000

  • Not said much yet
  • **
  • Posts: 90
Re: HELP.. CLUTCH RELATED ISSUE!!
« Reply #19 on: 03 June 2012, 20:37 »
I've just taken it for a drive as the noise has gone and the clutch and gear box are working and the noise has gone and the gear box and clutch are working perfect again. But the oil light is flashing and beeping but it has oil n I have checked the sensors onto of the oil filter.