however it is apparently boared out to a 3.0. didnt know you could boar that much of an engine out,everyone i know have only done it by .1 or so of an engine, i.e r32t boared out to be 3.3Tif it is it could be quite interesting to see what power it could put out. and if its been done properly to a decent standard of workor as he put is bored
Quote from: mcgee9t2 on 25 May 2012, 22:22however it is apparently boared out to a 3.0. didnt know you could boar that much of an engine out,everyone i know have only done it by .1 or so of an engine, i.e r32t boared out to be 3.3Tif it is it could be quite interesting to see what power it could put out. and if its been done properly to a decent standard of workor as he put is boredVr6 engines can be 2.8 or 2.9 as standard I believe, so you would only be going for an extra 100cc as you have said is possible.The correct term is also 'bored out', not 'board out'
But for the purest engine experience, displacement has no replacement. All other methods are simply attempts to artificially recreate the benefits of displacement.
Golf mk3 vr6 is 2792cc, corrado vr6 is 2861cc.Not a huge difference.
There are only 27 3dr vr6`s left on the rdand fast becoming a classic