Long time since last update, been abroad and took sometime off bloody cars and enjoyed some sun!!
Been busy since been back though!!
Should work a treat mate.. Where you get double ended female ?? peddle should feel no different as the feel is in the cylinders..
Got the flexi from local trade parts place called dingbro, was a delphi hose. Probably have the box and part number somwere if you need it.
Good work so far mate, how long do you reckon before this is back on the road?
Hopefully in about 2/3 weeks. Hopefully less haha!!
So, got the FMIC fitted, made up some brackets from some old gate brackets
Plumbed the whole lot in, new vacuum pipes and new silicon TIP, aloy hard charge pipes and silicone hoses from ASH.COM
Few bits need adjusted, But pritty happy with result so far
Might get some stick for going blue, but i think it works pritty well tbh.
Got all this stuff in, pritty chuffed tbh
Went to start it the other day, starts and runs!!!!!!! Delighted!!! Only problem, was idling for 2/3 secs then dying... Checked all earths, sensors, plugs, fuses. But looked to me to be an imobiliser fault, which is pritty annoying seeing as the ECU was supposed to be unlocked.... Borrowed the scanner from work to have a look
Other faults are from me messing around with plugs and all cleared fine. Bit annoying iv now gotta send ECU away again... Gonna get the imob chip removed completally rather than just reflashed.
Should get it back next week, then just need to touch up afew bit in the bay and then get the interior back together, new wings and sort out the hoses for the servo then put it to paintshop. Also some new clips for the hoses
Whats people experiance with after market body panels? Not sure what to go for
