« previous next »
Pages: [1]

Author Topic: Annoying noise from the engine bay.  (Read 1902 times)

Offline carld

  • Not said much yet
  • **
  • Posts: 13
Annoying noise from the engine bay.
« on: 24 April 2012, 23:51 »
I was just wondering if any of you were able to tell me what this whining noise is coming from my engine bay? It's 1.6 driver and when it first came into my hands it never used to make this noise, but its been sat on my driveway for about 6 months.

http://www.youtube.com/watch?v=9PT5PWUjnXs&feature=youtu.be  (you hear it most at the 16second point)

Logged

Offline Mr Blue

  • Forum addict
  • *
  • Posts: 6,133
Re: Annoying noise from the engine bay.
« Reply #1 on: 25 April 2012, 00:50 »
WTF  :laugh:
Logged
:)

Offline The Mighty Elvi

  • I live here
  • *****
  • Posts: 2,449
  • I'm better than you today.
Re: Annoying noise from the engine bay.
« Reply #2 on: 25 April 2012, 10:25 »
Does the noise change when you rev the engine?  Does it change when you drive the car.

Sounds like a bearing. somewhere.

 :grin:
Logged

Offline Pluginz

  • Not said much yet
  • **
  • Posts: 79
Re: Annoying noise from the engine bay.
« Reply #3 on: 25 April 2012, 11:21 »
Could it be the exhaust manifold leaking and making a strange whizz noise?  Just a guess.   :smiley:
Logged

Offline carld

  • Not said much yet
  • **
  • Posts: 13
Re: Annoying noise from the engine bay.
« Reply #4 on: 27 April 2012, 14:21 »
Sorry about the late reply, i've only just had chance to have another look at the car. The noise doesnt seem to get louder when i rev the engine but i can't take it anywhere to drive as its got no tax or insurance :/

Not sure on how i can check if the exhaust manifold is leaking though.
Logged

Offline Seanl

  • I live here
  • *****
  • Posts: 2,561
Re: Annoying noise from the engine bay.
« Reply #5 on: 27 April 2012, 15:06 »
Get a piece of tissue paper and run it around the gasket. If the paper blows, you have a blow. Simple.  :wink:
Logged
Classic Green Corrado VR6 Storm | Jetex Cat back | BMC CDA | VT mounts | Bilstein B12 | 288mm front brakes | Mk4 rear brakes | Goodridge braided hoses | BBS RX228s | Shortshifter | Lupo wipers | Uprated headlight loom | All red rears | Refreshed leather | Fresh paint |

Offline clipperjay

  • I live here
  • *****
  • Posts: 3,150
Re: Annoying noise from the engine bay.
« Reply #6 on: 27 April 2012, 16:09 »
What volts are you getting off the alternator if its low the bearings could be on the way out can't tell for sure alternator spins at one speed by the way constant supply off the belt could be worn belt rubbing  :undecided:
Logged

Offline The Mighty Elvi

  • I live here
  • *****
  • Posts: 2,449
  • I'm better than you today.
Re: Annoying noise from the engine bay.
« Reply #7 on: 27 April 2012, 16:42 »
Quote from: clipperjay on 27 April 2012, 16:09
What volts are you getting off the alternator if its low the bearings could be on the way out can't tell for sure alternator spins at one speed by the way constant supply off the belt could be worn belt rubbing  :undecided:

Disconnect the alternator and belt, then start the car.  If noise goes, then.. :wink:

Logged

Offline clipperjay

  • I live here
  • *****
  • Posts: 3,150
Re: Annoying noise from the engine bay.
« Reply #8 on: 27 April 2012, 17:05 »
Quote from: The Mighty Elvi on 27 April 2012, 16:42
Quote from: clipperjay on 27 April 2012, 16:09
What volts are you getting off the alternator if its low the bearings could be on the way out can't tell for sure alternator spins at one speed by the way constant supply off the belt could be worn belt rubbing  :undecided:

Disconnect the alternator and belt, then start the car.  If noise goes, then.. :wink:



TBH Jon it was more bearings on the alternator I was heading for, as belt noise is louder usually, but hey no harm in testing good idea!
Logged
Pages: [1]
« previous next »