Don't do it. I know where the link is but I am not going to tell you...
I removed all of the 'unessential' hoses and vac lines when I removed my EGR...Basically had a remap the other day and found out that she was overboosting and not holding the boost for the entire range-not good. This could have been due to the fact that I removed all of the valves and hoses. I have plumbed them all back in and need to go and do some logging to find out if this was the cause.
I'd advise against it, just block off the 2 spare hoses, stick a screw in then cable tie it up...