Author Topic: Golf MK3 CL OVER!!! starting on a golf mk2  (Read 48063 times)

Offline DanChave

  • I live here
  • *****
  • Posts: 1,759
Re: Golf MK3 CL (Project)
« Reply #110 on: 14 June 2012, 15:39 »
Looking good on the cups dude :)

Offline leigh_harty

  • I live here
  • *****
  • Posts: 1,462
  • Audi AGU
Re: Golf MK3 CL (Project)
« Reply #111 on: 14 June 2012, 17:07 »
Are the dishes just smooth metal?

My last ones where a pig to keep clean but polished up looked the nuts.

If they arnt lacquered just don't let brake dust settle on them.... I mean I cleaned mine everyday!
Dont lose your dinosaur!

Offline murraymint

  • I live here
  • *****
  • Posts: 3,022
Re: Golf MK3 CL (Project)
« Reply #112 on: 14 June 2012, 17:26 »
Should of gone for smaller tyres  :lipsrsealed:


Lower the car a bit n it'll be lookin sweet, nice buy  :cool:
josh


95 Mk3 golf 1.6 CL, 96 Mk3 golf gti 16v, 89 Mk2 Jetta GL97 Mk3 golf gti 16v, 99 bora 2ltr se, 83 mk1 golf 1.1, 15 polo 1.2 tsi

Offline search

  • I live here
  • *****
  • Posts: 898
Re: Golf MK3 CL (Project)
« Reply #113 on: 14 June 2012, 17:26 »
no dishes are some silver/very light gold looking paint, i will be making them bare metal polish them up etc but that much later down the road.

since they put them on tho when i break i can hear something rubbing! thinking maybe its the weights they put on as there is not much of a gap from breaks to the back of the alloys!
Golf mk3 1.4 (sold)
Golf mk2 1.3 (sold)
Golf mk3 1.6

Offline search

  • I live here
  • *****
  • Posts: 898
Re: Golf MK3 CL (Project)
« Reply #114 on: 14 June 2012, 17:28 »
these are my old tyres, couldn't wait to get new ones. when i do get new ones thinking 175/50 or 195/45 but yes the front end needs lowering very much so. just no C spanners.
Golf mk3 1.4 (sold)
Golf mk2 1.3 (sold)
Golf mk3 1.6

Offline murraymint

  • I live here
  • *****
  • Posts: 3,022
Re: Golf MK3 CL (Project)
« Reply #115 on: 14 June 2012, 17:29 »
no dishes are some silver/very light gold looking paint, i will be making them bare metal polish them up etc but that much later down the road.

since they put them on tho when i break i can hear something rubbing! thinking maybe its the weights they put on as there is not much of a gap from breaks to the back of the alloys!

Under heavy breaking or all he time? Could be tyres catching the coilovers
josh


95 Mk3 golf 1.6 CL, 96 Mk3 golf gti 16v, 89 Mk2 Jetta GL97 Mk3 golf gti 16v, 99 bora 2ltr se, 83 mk1 golf 1.1, 15 polo 1.2 tsi

Offline search

  • I live here
  • *****
  • Posts: 898
Re: Golf MK3 CL (Project)
« Reply #116 on: 14 June 2012, 17:56 »
i think just under breaking, Hmmmm is this bad? was told 195/50 would be fine on them. there 7j 15 et28
Golf mk3 1.4 (sold)
Golf mk2 1.3 (sold)
Golf mk3 1.6

Offline murraymint

  • I live here
  • *****
  • Posts: 3,022
Re: Golf MK3 CL (Project)
« Reply #117 on: 14 June 2012, 18:39 »
i think just under breaking, Hmmmm is this bad? was told 195/50 would be fine on them. there 7j 15 et28

Easiest ray to check is have a look on the inside tyre wall, and see if it's warn at all
josh


95 Mk3 golf 1.6 CL, 96 Mk3 golf gti 16v, 89 Mk2 Jetta GL97 Mk3 golf gti 16v, 99 bora 2ltr se, 83 mk1 golf 1.1, 15 polo 1.2 tsi

Offline search

  • I live here
  • *****
  • Posts: 898
Re: Golf MK3 CL (Project)
« Reply #118 on: 21 June 2012, 17:24 »
Little update: but its the little things that make the big things look better ;-)

ok so wanted some center caps when i came across a little DIY with golf mk4 center caps here it was.

Step 1: remove ring and take off little lugs. i shaved them down.


Step 2: Heat up bigger lugs and move them in slightly for a tighter fit.


Done now center caps will fit ATS CUPS!

Step 3: Mask off area i wanted to keep.


Step 4: PAINT!!!!


step 5: unmask your art work.
 

Step 6:


TADA!!!  i like these i must say.



Buying this back box: any advice?

http://www.ebay.co.uk/itm/360433400698?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649#ht_3867wt_1299
Golf mk3 1.4 (sold)
Golf mk2 1.3 (sold)
Golf mk3 1.6

Offline murraymint

  • I live here
  • *****
  • Posts: 3,022
Re: Golf MK3 CL (Project)
« Reply #119 on: 21 June 2012, 17:34 »
Very cool little mod there. Wheels look  :cool:, good work
josh


95 Mk3 golf 1.6 CL, 96 Mk3 golf gti 16v, 89 Mk2 Jetta GL97 Mk3 golf gti 16v, 99 bora 2ltr se, 83 mk1 golf 1.1, 15 polo 1.2 tsi