Author Topic: Gearbox question ??  (Read 2355 times)

Offline Deano2711

  • I live here
  • *****
  • Posts: 2,874
  • 1992 VR6
Gearbox question ??
« on: 10 February 2012, 18:05 »
Wandering if anyone can shed some light on this one. My car has been in the garage since Wednesday for a new clutch. I ordered one from Euro Car Parts and took it to my garage to fit. He is now telling me this is the wrong clutch and the gearbox on my 8v is actually off a diesel !!!!!  Could this be possible and what effect would it have on the car ??  I have had 6 Mark 3's in my time and apart from the VR this is by far the quickest which may be helped by the twin cold air feeds and cone filter and the fuel regulator switch. Would the diesel gearbox help at all ??

Offline Edwh0re

  • Here all the time
  • ****
  • Posts: 399
Re: Gearbox question ??
« Reply #1 on: 10 February 2012, 18:16 »
Chances are someone buggered a gearbox somewhere along the line and either couldn't find the correct coded gearbox or dropped on the dizzler 'box cheaply.  Would have thought a dizzler box would have longer ratios?


Offline Dan_GTi8v

  • I live here
  • *****
  • Posts: 1,904
Re: Gearbox question ??
« Reply #2 on: 10 February 2012, 18:28 »
I may be wrong but I thought all 020 clutches were the same on 8v's regardless of gearbox? some people like fitting diesel box's as they are stringer have have 'better' ratios, but I wouldn't of thought they would need a different clutch. I'm sure someone will come along and proove me wrong shortly though :P
20vt conversion, sig pic coming soon!

Build thread http://www.golfgtiforum.co.uk/index.php?topic=167291.0

Offline benvictors

  • I live here
  • *****
  • Posts: 1,172
  • bgk Tuning - coming soon!!!
Re: Gearbox question ??
« Reply #3 on: 10 February 2012, 23:25 »
All mk3 020 boxes have the same clutch and flywheel...... I think   :huh:
The ratio's are different tho but this wouldn't affect the clutch anyhow. The really early mk2 020's had smaller input shafts which would affect the clutch, the clutch and gearbox would fit back to the block but the clutch would be useless  :undecided:

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Gearbox question ??
« Reply #4 on: 10 February 2012, 23:48 »
All mk3 020 boxes have the same clutch and flywheel...... I think   :huh:

I did think the 16v was different but all the rest are the same  :undecided:

Offline benvictors

  • I live here
  • *****
  • Posts: 1,172
  • bgk Tuning - coming soon!!!
Re: Gearbox question ??
« Reply #5 on: 11 February 2012, 00:12 »
16v is 02a brother  :wink:

Offline Deano2711

  • I live here
  • *****
  • Posts: 2,874
  • 1992 VR6
Re: Gearbox question ??
« Reply #6 on: 11 February 2012, 08:07 »
Apparantly the clutch the garage needed had to be measured specially and the chap reckoned Euro Car Parts would not be able to supply this one and he uses them so probably tried them first. Got one delivered late yesterday afyernoon so I should hopefully get my car back Monday. Been without it since Wednesday and it feels lile a partbof me is gone !!!!!!

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Gearbox question ??
« Reply #7 on: 11 February 2012, 08:09 »
See if you can get the guy in the garage to give you the code off the gearbox (stamped in the bellhousing), that will tell you more.

Offline Deano2711

  • I live here
  • *****
  • Posts: 2,874
  • 1992 VR6
Re: Gearbox question ??
« Reply #8 on: 13 February 2012, 19:37 »
Well I now have my car back and an empty wallet !!!!  Turns out my gearbox is off a 1989 1.8 Golf and when he checked he reckoned it is factory standard. At least the car is back and drives well again.

Offline tweed

  • Forum addict
  • *
  • Posts: 5,379
Re: Gearbox question ??
« Reply #9 on: 13 February 2012, 19:40 »
So how much did it cost for a mk2 gti clutch?

Untitled by tweedub, on Flickr