What do i do with this sensor thing that was on my airbox? HELP!

[Jayz]

What do i do with this sensor thing that was on my airbox now i have a cold air intake? btw i have a 1.8t agu.

[Dave_IOW]

Zip tie to your metal pipe.

Needs to stay cool.

Its called an ignition amplifier.

[symsymma]

Zip tie to your metal pipe.

Needs to stay cool.

Its called an ignition amplifier.

+1 not a problem.

[gavgtiturbo]

I screwed mine to the threaded hole in the picture on the bulkhead 

[Jayz]

Cheers guys! so do i just cable tie it as it is to the pipe? or unscrew the metal plate from the ignition amplifier and put the ignition amplifier on one side of the pipe and the metal plate on the opposite side and cable tie them together with the pipe in between?

[Jayz]

I screwed mine to the threaded hole in the picture on the bulkhead 

Is that in the 1st pic mate?

[mcgee9t2]

it just needs to be kept cool and kept somewere its not going to jiggle around and snap off, so dont mount it on the engine and dont leave it hanging, up to you what you do with it tbh, ide just screw it onto one of the threaded holes were the air box was like said previously

[Jayz]

it just needs to be kept cool and kept somewere its not going to jiggle around and snap off, so dont mount it on the engine and dont leave it hanging, up to you what you do with it tbh, ide just screw it onto one of the threaded holes were the air box was like said previously

ok mate gotcha cheers.

[cullygti]

and dont take the metal bit off leave it as a whole and fix it out the way all still connected if that makes sense 

[Jayz]

all sorted thanks peeps!