Hey all,
Currently I am running a "built not bought" Mk3 Golf Supercharged VR6, of which I am just about to do an engine swap to a 1.8T BAM on standalone management. I am really proud I did all the work myself on the VR6SC but going 1.8T I need some professional help so Ben (parsonsperformance) is going to work with me on this. To be fair its him and mostly Brad aka kells77 fault!!! Thats what I tell my misses.
So this is the current spec
Engine
OBD2 VR6 - For Sale
Schimmel 263 Cams with New OEM Tappets - For Sale
Vibra-Technics Fast Road Rear Engine Mount
Vibra-Technics Fast Road Rear Gearbox Mount
Vibra-Technics Competition Front Engine Mount
Crankhouse Breather to Oil Catch Can - Included with the Supercharger
Carbon Canister Relocated to the passenger side- Included with the Supercharger
Samco Blue Hose Kit - Sold
Supercharger - For Sale
Vortech V3
Stage 2 Pulley (8 PSI)
Custom Air Intake Pipework including MAF relocation
K&N Relocated to the passenger side arch
Stack Boost Gauge and Dash Board Mount
VF Race Valve upgraded with a Forge 007p Yellow Spring
Oil Breather Delete on the Air Intake side of the Charger
Most Parts have been Modified from the Kit
Mapped by Vince @ Stealth Racing
All Rubber Hoses Replaced with ASH Silicone Houses
All Clamps Replaced with Mikalor Style Clamps
Fuelling
Walbro inline Fuel Pump - For Sale
Red Top Injectors - Included with the Supercharger
4bar FPR- Included with the Supercharger
Dubpower HT Leads - For Sale - I have two sets
Audi TT Plugs- Included with the Supercharger
Exhaust
Jetex Non-Resonated Exhaust
42 Draft Design Sports Cat - For Sale
2.5inch Bore
Transmission
LUK Clutch
OEM Transmission Fluid
Brakes
312mm Brake Conversion
Brembo Discs All Round
EBC Green Stuff Pads on the Front
Mintex Pads on the Rear
Goodridge Braided Brake Hoses
Suspension
AP Coilovers with New OEM Top Mounts
Powerflex Polybushed Front Wishbones and Rear Beam
OMP Rear Strut Brace
Wheels
16in Compomotive TH Mono 5×100 8J Satin Black
ET25 on the Fronts
ET20 on the Rears with 5mm Spacers
Falken 912 with 205 45 16 R
Bodywork
Vento Front End with Late Grill
Piano Black Wing Mirrors
Tinted Front Lights
Philips Uprated Bulbs
FK Tinted Front Fogs and Indicators - Looking for std ones
VR6 Front Deep Spoiler
Tinted Side Indicators
Side Skirts Removed
Rear Door Insides Removed
Rear Arches Rolled
Rear Wiper Delete
Tinted Rear Clusters
Pressed Plates and Surrounds
OEM “Supercharged” Badge - For Sale
Just a few pictures of currently as she stands
So whats the new plan???
Well this is the shopping list and the build started yesterday lol
1.8T 20V BAM engine 42,000 miles
K04 Turbo
K04 Trackslag 2.5inch Downpipe inc. decat to my current Jetex (cheers kells77)
Standalone ECU - Emerald K6 ECU (3 map selector switch option) with a BAM spliced loom
Toyosport Front mounted intercooler and ASH 63mm pipework
O2A DPA 4 Cyl ABF Gearbox
O2A ABF Flywheel
O2A Starter motor ABF
4 Cyl Clocks from 8v/16v or Ibiza ABF
ABF Front, rear and O2A VR6 gearbox mounts
LUK VR6 Clutch Kit
3 Bar MAP sensor
JR cone filter
Badger 5 TIP
Forge 007P + Yellow Spring
The plan is to recycle as much kit from the old build that can be used and sell the rest!!!! I also have my own blog if you want to take a look
www.lovemelongtime.co.uk but please keep comments on the forum/thread!!!!!
