what wheel bolts do i need for my wheels? UPDATED with Pics 2nd page

[Wayne]

Easy to source on ebay but 100% taper bolts needed, they may not be Cades btw loads of reps available

[jnufcuk]

Wheels bolts straight thru. Popping down to halfords later bud can't see then having ones thst long? Don't kno where else to try where I can get them straight away

[Wayne]

Not sure how close this is to you: http://www.ebay.co.uk/itm/20-x-VW-Wheel-Bolts-Golf-14-x-1-5-/250699753659?pt=UK_Cars_Parts_Vehicles_Wheels_tyres_Trim_Nuts_ET&hash=item3a5edea8bb

Or: http://www.ebay.co.uk/itm/20-pcs-WHEEL-BOLTS-VW-GOLF-4-14X1-5-28MM-/260824535916?pt=UK_Cars_Parts_Vehicles_Wheels_tyres_Trim_Nuts_ET&hash=item3cba5a936c

[jnufcuk]

had a look at bolts and these are the ones they have atm?

[Steve_PD]

They are tapered bolts.

[jnufcuk]

They are tapered bolts.

so they are correct atleast must have just worked loost then or someone undone them 

size is correct?

will have to get some more then. Will hopefully try the place wayne suggested.

Thanks guys

p.s. just found out the are cade berns 710

[Wayne]

This to me looks like it has been overtightened  maybe the spacers are causing issues

[Steve_PD]

40mm bolts, they the ones which go through the 20mm spacers? Did you torque them up?

[jnufcuk]

40mm bolts, they the ones which go through the 20mm spacers? Did you torque them up?

yes theyre the ones which go thru, dont have a torque wrench so just done them tight?

Been to about 3-5 different wheels places and non have any bolts that size 

got myself a torque wrench and copper grease on the plus side lol

question is now:

what size would normal bolts be as i may take of spacers off for the time being until i can source some longer bolts.

Thanks

edit:

had the same bolts on montys and 4motion alloys (winter wheels) and no problems?

[cullygti]

are they long enough mate i got 41mm long bolts with 15mm spacers they came with the spacers as a set so 40mm with 20mm spacer just dont seem right to me  just read rest of post lol