A friend of mine at work has asked me to read his codes as his car has cut out a few times, its a 2.0 petrol 2002 passat, codes stored are
17927
P1519
Intake Camshaft Contr.,Bank1 Malfunction
16705
P0321
Ign./Distributor Eng.Speed Inp.Circ Range/Performance
16706
P0322
Ign./Distributor Eng.Speed Inp.Circ No Signal
Anyone shed some light, dizzy cap and rotor arm to start with?
cheers
17927/P1519/005401 - Camshaft Adjustment Bank 1: Malfunction
Possible Symptoms
* Malfunction Indicator Light (MIL) ON
Possible Causes
* Fuse(s) faulty
* Camshaft Adjustment Valve Bank 1 (N205) faulty
* Wiring and/or Connector(s) from/to Camshaft Adjustment Valve Bank 1 (N205) faulty
Possible Solutions
* Check Fuse(s)
* Check/Replace Camshaft Adjustment Valve Bank 1 (N205)
o Perform Output Test/Basic Setting
* Check Wiring and/or Connector(s) from/to Camshaft Adjustment Valve Bank 1 (N205)
16705/P0321/000801 - Engine Speed Sensor (G28): Implausible Signal
Possible Symptoms
* Engine shuts off
* Engine doesn't start
* Speedometer inoperative
* Glow Plug Indicator Lamp (K29) flashes
Possible Causes
* Engine Speed Sensor (G28) loose
* Engine Speed Sensor (G28) faulty
Possible Solutions
* Check Engine Speed Sensor (G28)
Special Notes
* The Engine Speed Sensor (G28) is also used as a reference sensor for the crankshaft position and correlates with the Camshaft Position Sensor Bank 1 (G40) and Camshaft Position Sensor Bank 2 (G163).
* When found in a VW Golf/Jetta (1J/9M) or Audi A3 (8L) with 1.9l TDI-PD (AXR), check TPI 2007067 which explains issues with electro magnetic interference. A modification to the wiring will fix this problem, extensive details can be found in the named TPI. Even though this TPI was originally released for VW Golf/Jetta (1J/9M), a customer of ours came across the same issue on an Audi A3 (8L).
* When found in a 2004 VW Golf, Jetta, or New Beetle with 1.9l TDI-PD (BEW), check for TSB 2010461 (01-07-45 formerly 97-05-03) or 201463 (01-07-44 formerly 97-05-04) calling for a flash update to the ECU and a secondary ground installation.
16706/P0322/000802 - Engine Speed Sensor (G28): No Signal
Possible Symptoms
* Engine shuts off
* Engine doesn't start
* Speedometer inoperative
* Glow Plug Indicator Lamp (K29) flashes
Possible Causes
* Engine Speed Sensor (G28) loose
* Engine Speed Sensor (G28) faulty
Possible Solutions
* Check Engine Speed Sensor (G28)
Special Notes
* The Engine Speed Sensor (G28) is also used as a reference sensor for the crankshaft position.
Retrieved from "
http://wiki.ross-tech.com/wiki/index.php/16706/P0322/000802"
Category: Fault Codes
