bluetooth instalation help

[DDg]

I pulled up the sill trim and ran it along close the chair then pushed it under the carpet and fed it up through the hole where the airbag wiring is rather than under the chair rails.

So infront of the seat rails, then? I felt around that moulded box (with the harness in it) under the seat but couldn't see a way of getting the wire to it without a bulge under the carpet. Might have another look tomorrow. Cheers.

Quite enjoyed mucking about today. Overcome the initial trepidation of yanking bits of trim off and it turns into a nice little challenge.

[The Doc]

It's all good clean fun 

[bcarlin]

anyone had any problems installing there phone kit, ive just had a phone call from the guy doing my coding to say its showing a fault and it wont work.he tells me the kit is faulty and should be returned

[SteveP]

What fault code is it showing?

The coding is pretty straight forward via the long coding helper but as it's a new module it needs initialising (i.e. entering a workshop code etc).

Also needs to be enabled in the Can gateway (77 Telephone).

[The Doc]

Th usual, ariel, baseplate by also short to ground in the control unit 

The guy called me bu it wouldn't accept telephone code in radio, gateway etc 

I tried my best for you mate.

[ajmoir36]

anyone had any problems installing there phone kit, ive just had a phone call from the guy doing my coding to say its showing a fault and it wont work.he tells me the kit is faulty and should be returned

Thats not good.

[bcarlin]

got the car back from the garage and not sure what he was on about but it working 100% 
i think the guy tried to get his phone to find the car and that made him think it was not working
the steering  wheel controls/telephone book etc are all working a treat
doc thanks for all your help your a top bloke 

[The Doc]

Ha ha good news, it's a very simple task to be fair.

[DDg]

I'm all up and running and although it's early days, I'd say it's head and shoulders better than the Fiscon it replaced. Sound quality's better, there's no interference / feedback when taking a call, it always goes back to the music when a call is finished, and there's a massive reduction in "dit dit-dit dit-dit" mobile-phone-on-a-speaker type noise coming through the speakers.

Only one tiny thing...

I have my contacts on my phone as "Smith John mob" etc.  But on my RCD510 they appear as "mob John Smith". Any way of getting the oem bt to show them exactly as my phone? Ta.

[The Doc]

What phone do you have?