Can any one help me With fault code

[ian007miles]

Right I just done a fault scan and this fault number came up 18010. It says in the book power suply(b+) terminal 30-low voltage does any one no wot this means

[Dan_GTi8v]

8010/P1602/005634 - Power Supply B+ Terminal 30: Voltage too Low

Possible Causes
Cables on the Battery were removed
Battery weak (voltage)
Generator Disfunction

Possible Solutions
Check Battery Cables
Check/Replace Battery
Check/Replace Generator

Special Notes
If multiple Control Module have Power Supply Faults stored, it's most likely to be one common Problem like the ones shown above. Otherwise when only one or two Control Modules have such Codes stored you better start searching at the individual Power Supply of these Modules.
Terminal 30 means unswitched battery power that is supplied even when the ignition is off. This is not referring to any physical terminal numbered 30.

[ian007miles]

Could it be that I took the battery off yesterday ??

[Wazzzer]

yep for defo

[jamie16v]

yep for defo

+1,
just clear the code and forget!

[ian007miles]

Ok thanx for the replys