yes mate re-aline the wheel' get a flat head screwdriver about 6inch long turn the wheel 180 degrees to left, there'll be a small hole in the back insert the screwdriver pointing up' as far in as it will go then prise down & it will pop off! then turn it 180 right & do the same.. can be a bit tricky

but i got a small mirror got the reflection of the small hole & could see the metal clip that i was prising off made it alot easier.

then just a case of removing the spline bolt & sitting the wheel back on in the right position.. but be careful of the air bag!! theres no need to remove the wires, i just sat it on the wheel being very careful

disconnect the batt if it makes u feel btr. hope this helps!
