« previous next »
Pages: [1]

Author Topic: 1.6 with gti cam  (Read 1592 times)

Offline vee-dub90

  • GTI forum regular
  • ***
  • Posts: 206
  • mk3 GTI 16V next year.
1.6 with gti cam
« on: 12 August 2011, 00:19 »
i am going to be putting a gti cam onto my 1.6 jetta, can i just shove it on with the existing cam followers that are being used with the standard cam? or do i use the cam followers that will be coming off the gti head which the cam is coming off?
Logged

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: 1.6 with gti cam
« Reply #1 on: 12 August 2011, 00:23 »
Are they both hydraulic cams.
Logged

Offline pigbladder

  • GTI forum regular
  • ***
  • Posts: 127
Re: 1.6 with gti cam
« Reply #2 on: 12 August 2011, 08:14 »
idealy take the gti cam followers and number them , assuming theyre in good condition and both cars are hyd heads
Logged

Offline vee-dub90

  • GTI forum regular
  • ***
  • Posts: 206
  • mk3 GTI 16V next year.
Re: 1.6 with gti cam
« Reply #3 on: 13 August 2011, 00:11 »
the 1.6 is the EZ and the gti is PB
Logged

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: 1.6 with gti cam
« Reply #4 on: 13 August 2011, 00:15 »
Quote from: vee-dub90 on 13 August 2011, 00:11
the 1.6 is the EZ and the gti is PB

So I guess the EZ is mech followers in which case I don't think it will work.
Logged

Offline danny_p

  • Forum addict
  • *
  • Posts: 4,646
Re: 1.6 with gti cam
« Reply #5 on: 14 August 2011, 10:23 »
EZ is hydralic

use the followers that cam is used to if there avalible but don't mix them up as there is no advantage in useing them if there mixed up.

you work with the the followers you have in there 
Logged
all the VW's have gone bar 1.

Offline vee-dub90

  • GTI forum regular
  • ***
  • Posts: 206
  • mk3 GTI 16V next year.
Re: 1.6 with gti cam
« Reply #6 on: 15 August 2011, 23:43 »
so it is a hydro head?
Logged

Offline dennis10

  • GTI forum regular
  • ***
  • Posts: 132
Re: 1.6 with gti cam
« Reply #7 on: 18 August 2011, 13:09 »
The short answer is if they are both hydraulic, then it will fit fine with the cam followers from your existing EZ setup.  I never had a problem when fitting the GTI cam to my old mk2, I cant see you having any either.
Logged
Pages: [1]
« previous next »