Joey Mod = Failed :(

[kempie]

ok so tryed it everyway i've seen in the how-to's forum and its failed more than the chavs in the riots
has anyone got any tips for me please?
thanks

[CCGTI]

in what way u failed

[kempie]

as in heating it to get the glass off the bloody unit
put it in the oven at 150 for 3mins, took out, burn hands, cut away as much as i could, bent loads of plastic, got annoyed cracked out the heat gun and nothing

[mellow yellow]

as in heating it to get the glass off the bloody unit
put it in the oven at 150 for 3mins, took out, burn hands, cut away as much as i could, bent loads of plastic, got annoyed cracked out the heat gun and nothing

just keep trying, get some oven gloves on and it wont burn you  i used a flat head and a butter knife to prise the glass away from the plastic.

have you removed the clips??

[VR6_Wherry]

as in heating it to get the glass off the bloody unit
put it in the oven at 150 for 3mins, took out, burn hands, cut away as much as i could, bent loads of plastic, got annoyed cracked out the heat gun and nothing

just keep trying, get some oven gloves on and it wont burn you  i used a flat head and a butter knife to prise the glass away from the plastic.

have you removed the clips??

What this man said, which how to's have you followed?

[VR6_Wherry]

Here is a great little how to: http://www.golfgtiforum.co.uk/index.php?topic=188600.0

 

[kempie]

i've been using yours dude and still no avail
how long have people left it in the oven?
if all else fails anyone near nottingham that i can pester to give us a hand please

[VR6_Wherry]

You can put them in for as long as you want, there is no set time period. Just make sure you don't melt anything!

I put them in for just over 5 minutes. Pull them out and place a flat head screw driver inbetween the glass and plastic and gently twist.

[Bellend]

What what lights?

Do they have the Hella stamp on the front lense?

[kempie]

stantard 1.6 GL lights as far as i know :/