« previous next »
Pages: [1]

Author Topic: Schmidt Modern-line alloys  (Read 5210 times)

Offline gtiballs61

  • I live here
  • *****
  • Posts: 543
  • Wanted-nearside wing in lp3g(flash red)
Schmidt Modern-line alloys
« on: 04 July 2011, 18:47 »
Got messed about last week buying some bbs rs for the mk3. :cry:
So have decided to buy the wheels i have always liked on the mk3 :cool:




The only thing im not sure on is wheel fitment :undecided:
I want wider rears,so would i be correct in buying these fitments:

FRONT WHEEL SETUP:           REAR WHEEL SETUP:
Size: 16x7.5"                   Size: 16x9.0"
PCD/Offset: 5x100 ET35   PCD/Offset: 5x100 ET25

I know i may need to do some arch work for the rears,its just the ET i dont understand :undecided:
Logged

Offline Jimp

  • I live here
  • *****
  • Posts: 2,321
Re: Schmidt Modern-line alloys
« Reply #1 on: 04 July 2011, 19:18 »
Just a note on these, only the 9" versions have the concave face. The 7.5" have a much straighter face. If you want the concave look all around you'll need 9's all around.
At 9" wide and ET25 you might need to flatten the lips on your arches and/or roll then depending on how low you are.
Logged
Not low enough mk5
Not on the road enough mk3

Offline gtiballs61

  • I live here
  • *****
  • Posts: 543
  • Wanted-nearside wing in lp3g(flash red)
Re: Schmidt Modern-line alloys
« Reply #2 on: 04 July 2011, 19:32 »
yeah was after the concave,9's all round then :cool: :kiss:

*update*
All round:
Size: 16x9.0"
PCD/Offset: 5x100 ET25
« Last Edit: 04 July 2011, 19:43 by gtiballs61 »
Logged

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Schmidt Modern-line alloys
« Reply #3 on: 04 July 2011, 20:13 »
Quote from: gtiballs61 on 04 July 2011, 19:32
yeah was after the concave,9's all round then :cool: :kiss:

*update*
All round:
Size: 16x9.0"
PCD/Offset: 5x100 ET25

Will need work but use 195/45/16's tyres and see how they fit.
Logged

Offline ineson

  • I live here
  • *****
  • Posts: 541
Re: Schmidt Modern-line alloys
« Reply #4 on: 05 July 2011, 09:28 »
They are some sexy wheel!  :tongue:
Logged

Offline Jack3559

  • I live here
  • *****
  • Posts: 2,301
Re: Schmidt Modern-line alloys
« Reply #5 on: 05 July 2011, 12:17 »
Good choice.

Check out G60_Rob's thread for fitment.

Could always drop him a PM about his setup.
Logged

Offline gtiballs61

  • I live here
  • *****
  • Posts: 543
  • Wanted-nearside wing in lp3g(flash red)
Re: Schmidt Modern-line alloys
« Reply #6 on: 05 July 2011, 18:12 »
Quote from: Jack3559 on 05 July 2011, 12:17
Good choice.

Check out G60_Rob's thread for fitment.

Could always drop him a PM about his setup.

Im 1 step ahead :smug:
Just waiting for a pm reply from him.
Ive been looking at his build thread,awesome car. :cool:
Logged

Offline tweed

  • Forum addict
  • *
  • Posts: 5,379
Re: Schmidt Modern-line alloys
« Reply #7 on: 09 July 2011, 18:05 »
don't get 9" front et25!!!
I have 8" front and et20 and they only just tuck under, fall camber and arch rolled and flared.

I have 8" front et20 9" rear et21 and the rear needed to be rolled.

I would go for your first fitment.
Logged

Untitled by tweedub, on Flickr
Pages: [1]
« previous next »