Fitting a DAB roof aerial

[Dan_GTi8v]

Tried fitting my DAB radio and aerial today, took it out the box and found the aerial has a seperate wire for the 12v connection. I read something about the mk3 aerial wire having the 12v incorporated into the signal wire, is this right? Can I use one of those seperation plugs to seperate the 12v from the signal wire or should I run the 12v from behind the headunit to the mast?

Everything else is all set up I have normal radio reception just need to get the 12v connected to power the dab feed

Cheers

[Wayne]

Run it off the electrical aerial feed or if your standard aerial has an amp use that, red wire from memory.

[Seanl]

I ran mine from the central locking pump as its nearer. Works a treat!!