« previous next »
Pages: [1]

Author Topic: Boost guage fitting on a PD130  (Read 1884 times)

Offline tsr_adi

  • I live here
  • *****
  • Posts: 698
Boost guage fitting on a PD130
« on: 03 June 2011, 08:40 »
I might be fitting a boost guage onto a mates Ibiza PD130, And I know it has to be T'eed into a vac pipe, but I've never worked on one, so where does it need tapping into? I assume they have a vac pipe to the ECU?
Logged

Offline Damon1991

  • Not said much yet
  • **
  • Posts: 15
Re: Boost guage fitting on a PD130
« Reply #1 on: 05 June 2011, 00:23 »
No.. Firstly the ECU is only electrical and does not create vacuum at all, is merely electrics.. Secondly fitting a boost gauge on a diesel is different to fitting one on a petrol, on a petrol as you did say correctly you connect it to a Vacuum line but on a diesel you have to connect it to a boost pipe.. I believe you can buy a threaded T-piece and tap into a boost pipe.. this will do the trick.. Hope this helps

Thanks Damon
Logged

Offline Adam

  • Forum addict
  • *
  • Posts: 5,194
Re: Boost guage fitting on a PD130
« Reply #2 on: 08 June 2011, 02:56 »
As per Damon.

Tell your mate to buy this EGR Valve from Allard, they have a take off to fit a boost gauge.

What year is the Ibiza?

Logged

Down Hill From Here.
Pages: [1]
« previous next »