1.6 to 1.8gti 8v conversion help

[kennedy]

Hi,
i have myself a 1990 1.6 driver and the engine is on its way out, picked myself up a digifant 1.8gti 8v engine for a bargain of a 100 from my friends mk2, i was just wondering if its a straight swap (looks it) and if id need the ecu and loom to wire the gti engine up or will my loom do the trick?
thanks

[lemski]

Gti loom unless ur off to carbs mate. Also undercar fuel pump and loom for that

[Wayne]

Gti loom and ecu, fuel pumps and lines are also needed I believe the tank is the same.

[lemski]

Ahh yes fuel tank. I changed the intank liftpump in mine cos the connector was differant but then i went from post 90 wiring to pre 90 and had to swap most of my looms

[kennedy]

Thanks for the info, big help!, so fuelpump + lines, ecu + loom? both engines are 1990
on the hunt for the parts now

[Wayne]

Also don't forget to look at uprating the brakes.

[kennedy]

ah yeah was gna get me a set of fresh pads and grooved discs, or would you recommend upscaling them?

[Wayne]

ah yeah was gna get me a set of fresh pads and grooved discs, or would you recommend upscaling them?

If they are vented they will be fine, just make sure they all work ok.

[kennedy]

Thanks,

would the 16v wiring loom be okay for the 8v?
found this, might be able to grab me a bargain
http://cgi.ebay.co.uk/MK2-Golf-GTI-engine-wiring-loom-etc-/120717268555?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1c1b4f564b

can i verify this... fuel pump and lines.?

http://cgi.ebay.co.uk/volkswagen-golf-mk2-gti-8v-fuel-lift-pump-/170635777465?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item27baaf55b9

and lines

http://cgi.ebay.co.uk/VW-MK2-GOLF-GTI-16V-G60-8V-FUEL-FEED-LINE-BLACK-/160582081104?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2563701a50

http://cgi.ebay.co.uk/VW-MK2-GOLF-GTI-16V-FUEL-BANJOS-FUEL-DISTRIBUTOR-/160582125351?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item256370c727

would that complete me?

[lemski]

If the 8v is digi then 16v looms wrong as there all k-jets. Best bet is find someone who's breaking a 1.8 gti and get all the stuff of them. Make sure its the right wiring. Pre or post 90. Pre 90 is 2pin clocks and post 90 is single clocks.