boost gauge does anybody no what vaccum pipe

[golf1.8t]

just got my boost gauge and not sure how to fit it any help would be great and save me some money getting it fitted for my next mod thanks

[dubvrs]

Use the one that goes to the top of the dump valve.

Pic of mine.

[golf1.8t]

how did you get that nylon tube through to the inside of the car from the engine and what valve have you got there recirc/atmos

[golf1.8t]

i tryed that pipe but it seems to be a bit jumpy wen i rev the engine

[A1Crazy]

don't use that hose.  Use the one off of your fuel pressure regulator.  It is a direct feed off of the manifold.  The hose going to the diverter valve has pressure regulated by a couple valves and is not accurate

[golf1.8t]

weres that and what does it look like.

[golf1.8t]

any body out there.

[A1Crazy]

[golf1.8t]

cool thanks ill try that could you also tell me an simple route to get the little nylon pipe into the car.

[A1Crazy]

I used zip ties to run it next to the hard plastic brake vac line.  Then I ran it in the firewall thru the grommet located next to the brake booster