broken down ***UPDATE-New head bought!***

[jamie16v]

You need to get the bottom cover off really to get a better look, can't really tell from the vid as it's not long enough.
 Put the car in fifth gear and get someone to push it while you watch the belt, that would rule out the starter motor.

#
+1, or jack up one side and turn the wheel by hand..

[Wayne]

Vid needs to be longer but sounds like no compression

[tech1889]

valves have gone i recon.. not as hard of a job as it sounds.. its just more daunting going over it in your head.. sell some of the mod bits to pay for fix !!

[Dave_IOW]

+1, or jack up one side and turn the wheel by hand..

Will this work then? Can do this tomorrow just to check?

Just take cam cover off and try to spin jacked up wheel?

[Mr_Orange]

+1, or jack up one side and turn the wheel by hand..

Will this work then? Can do this tomorrow just to check?

Just take cam cover off and try to spin jacked up wheel?

Guess so.  With it in gear yes? 

Weird.  Video sounds like only the starter is spinning and nothing else.  You think it might be turning the crank which aint connected to the cambelt anymore (ie Cam gear aint turning)?  Slipped the keyway off the lower pulley perhaps?

Good luck with this mate, I hope its something silly (ie cheap to fix).

Also good luck with the move!

[tech1889]

just take cam cover off and put a bit spanner on the nut and turn the engine over..

[Dave_IOW]

Weird.  Video sounds like only the starter is spinning and nothing else.

This is certainly what it sounds like to me!

Hoping for an easy fix to, but knowing my luck 101% sure it wont be 

[cullygti]

like mine then dude only luck i get is bad friggin luck 

[Dave_IOW]

Right guys, is it the bottom cover i need to take off aswell as the top??

[Dave_IOW]

Right top cover off and looking at belt, its exactly how it should be.

Have remove AUX belt and 3 bolts for bottom cover but cant see how do get it off?