« previous next »
Pages: [1]

Author Topic: My Track Rat  (Read 3994 times)

Offline trackday

  • Not said much yet
  • **
  • Posts: 41
My Track Rat
« on: 06 February 2011, 20:27 »
Logged
Spec- Sounds awesome 2800CC VR6 200BHP Remapped with 7300 rev limit. Kent cams, cold air carbon intake kit. Forged pistons,power boost valve,6 branch manifold, de-cat pipe and full powerflow exhaust system.Grooved discs with red stuff pads. Gaz Gold fully adjustable suspension, 3.8 camber at front.
Full race cage, Momo steering wheel and corbeau race seats with four point harness. Fire extinguisher and 4.26 final drive conversion

Offline trackday

  • Not said much yet
  • **
  • Posts: 41
Re: My Track Rat
« Reply #1 on: 06 February 2011, 20:30 »
http://www.youtube.com/watch?v=3e6ZsywMJdk a vid of my chasing my mate at Silverstone GP
Logged
Spec- Sounds awesome 2800CC VR6 200BHP Remapped with 7300 rev limit. Kent cams, cold air carbon intake kit. Forged pistons,power boost valve,6 branch manifold, de-cat pipe and full powerflow exhaust system.Grooved discs with red stuff pads. Gaz Gold fully adjustable suspension, 3.8 camber at front.
Full race cage, Momo steering wheel and corbeau race seats with four point harness. Fire extinguisher and 4.26 final drive conversion

Offline trackday

  • Not said much yet
  • **
  • Posts: 41
Re: My Track Rat
« Reply #2 on: 06 February 2011, 20:33 »
http://www.youtube.com/watch?v=p-E7IhWh3pQ and another gonna change the diff to a 3.94 as my mate killed me in this one!!!
Logged
Spec- Sounds awesome 2800CC VR6 200BHP Remapped with 7300 rev limit. Kent cams, cold air carbon intake kit. Forged pistons,power boost valve,6 branch manifold, de-cat pipe and full powerflow exhaust system.Grooved discs with red stuff pads. Gaz Gold fully adjustable suspension, 3.8 camber at front.
Full race cage, Momo steering wheel and corbeau race seats with four point harness. Fire extinguisher and 4.26 final drive conversion

Offline trackday

  • Not said much yet
  • **
  • Posts: 41
Re: My Track Rat
« Reply #3 on: 06 February 2011, 20:37 »
http://www.youtube.com/watch?v=t5W9OibqOF4 white golf at Silverstone after 8 mins take some getting past lol
Logged
Spec- Sounds awesome 2800CC VR6 200BHP Remapped with 7300 rev limit. Kent cams, cold air carbon intake kit. Forged pistons,power boost valve,6 branch manifold, de-cat pipe and full powerflow exhaust system.Grooved discs with red stuff pads. Gaz Gold fully adjustable suspension, 3.8 camber at front.
Full race cage, Momo steering wheel and corbeau race seats with four point harness. Fire extinguisher and 4.26 final drive conversion

Offline trackday

  • Not said much yet
  • **
  • Posts: 41
Re: My Track Rat
« Reply #4 on: 06 February 2011, 20:42 »
after Silverstone i have decided to change the diff as i couldnt get out the corners quick enough as the gearing is too long so hopefully this will sort it,has anyone else done this conversion???
Logged
Spec- Sounds awesome 2800CC VR6 200BHP Remapped with 7300 rev limit. Kent cams, cold air carbon intake kit. Forged pistons,power boost valve,6 branch manifold, de-cat pipe and full powerflow exhaust system.Grooved discs with red stuff pads. Gaz Gold fully adjustable suspension, 3.8 camber at front.
Full race cage, Momo steering wheel and corbeau race seats with four point harness. Fire extinguisher and 4.26 final drive conversion

Offline tech1889

  • Serious forum addict
  • *
  • Posts: 8,039
  • Mk2 GTI FTW !!
Re: My Track Rat
« Reply #5 on: 06 February 2011, 22:44 »
looks good mate.. what made you choose a mk3 ??
Logged
Mk4 Golf GTI anniversary and mk6 golf tdi :)

Offline Diamond Hell

  • Serious forum addict
  • *
  • Posts: 7,997
  • Opinions я Us
Re: My Track Rat
« Reply #6 on: 07 February 2011, 14:10 »
If you're doing the diff conversion you would be better off putting an LSD in it while the gearbox is apart.

Sort those nasty harness mounts out and get some proper harnesses.
Logged
Just because you're offended doesn't make you right.

Holiday cottages on the Isle of Wight for 2-10 people? PM me.

Offline trackday

  • Not said much yet
  • **
  • Posts: 41
Re: My Track Rat
« Reply #7 on: 07 February 2011, 21:20 »
Quote from: tech1889 on 06 February 2011, 22:44
looks good mate.. what made you choose a mk3 ??
cause it was cheap and had most the stuff already done all i have had to do is the brakes and service etc paid 1500 quid for her
Logged
Spec- Sounds awesome 2800CC VR6 200BHP Remapped with 7300 rev limit. Kent cams, cold air carbon intake kit. Forged pistons,power boost valve,6 branch manifold, de-cat pipe and full powerflow exhaust system.Grooved discs with red stuff pads. Gaz Gold fully adjustable suspension, 3.8 camber at front.
Full race cage, Momo steering wheel and corbeau race seats with four point harness. Fire extinguisher and 4.26 final drive conversion

Offline trackday

  • Not said much yet
  • **
  • Posts: 41
Re: My Track Rat
« Reply #8 on: 07 February 2011, 21:22 »
Quote from: Diamond Hell on 07 February 2011, 14:10
If you're doing the diff conversion you would be better off putting an LSD in it while the gearbox is apart.

Sort those nasty harness mounts out and get some proper harnesses.

lol at harness mounts i no and lsd would be great if i had the funds but im not a endless money pit so a 1.8t 3.94 diff it is lol and harness mounts are doing the job so they can stay for a while lol
Logged
Spec- Sounds awesome 2800CC VR6 200BHP Remapped with 7300 rev limit. Kent cams, cold air carbon intake kit. Forged pistons,power boost valve,6 branch manifold, de-cat pipe and full powerflow exhaust system.Grooved discs with red stuff pads. Gaz Gold fully adjustable suspension, 3.8 camber at front.
Full race cage, Momo steering wheel and corbeau race seats with four point harness. Fire extinguisher and 4.26 final drive conversion
Pages: [1]
« previous next »