CV Joints

[Khare]

My bad I read it wrong, thought you said hub won't go back on.

If the nut doesn't go back on you can stick on any nut (that fits and tightens obviously) as a temporary measure. Mine had a normal nut on there until I found out and swapped it.

[AlexMozza]

It will, but its really tight, looks like the thread is a bit f00ked, was hard to get it of too though :/ Thread on the Shaft is fine though :/

[AlexMozza]

My bad I read it wrong, thought you said hub won't go back on.

If the nut doesn't go back on you can stick on any nut (that fits and tightens obviously) as a temporary measure. Mine had a normal nut on there until I found out and swapped it.

You dont happen to know what thread it is eg M8x1.25 ect

[Khare]

Don't force it then, you might end messing the shaft thread up and causing more expensive damage than just a bad nut.

Do what I said, so you can drive to a car parts place and get a shaft nut or just get one online and wait a few days.

No idea what thread it is mate, sorry! (30mm socket required though)

http://www.vwspares.co.uk/product_info.php?products_id=1687

And this sort of nut

http://www.vwspares.co.uk/product_info.php?products_id=564

[AlexMozza]

Coolio, Nope i've just left it. Thought i might of had the right size tap but no luck!
Where did you get the bolt from, B&Q ect?

[Khare]

Coolio, Nope i've just left it. Thought i might of had the right size tap but no luck!
Where did you get the bolt from, B&Q ect?

Well I bought that kit I linked you too which came with the bolt. Nut( ) sure where to buy it from on it's own, but my first guesses would be GSF and ECP.

[AlexMozza]

The kit i got did not have one Oh well, no MoT on monday :/