« previous next »
Pages: [1]

Author Topic: replacing coolant hose  (Read 728 times)

Offline Carl MK3 GTI 8V

  • Not said much yet
  • **
  • Posts: 53
replacing coolant hose
« on: 05 January 2011, 17:49 »
Hi I have a leak in the hose which runs to the back of the heater matrix (its the bottom one if that makes sense) from the engine bay! just wondering if you really need to drain all the coolant or can ya just pull it off and pop the new one on??
Any ideas on the diameter of the hose?
Thanks
Logged

Offline Seanl

  • I live here
  • *****
  • Posts: 2,561
Re: replacing coolant hose
« Reply #1 on: 05 January 2011, 20:07 »
You will probably need to drain it as it will all leak out anyway. You can re-use the coolant though If it's not too bad, just catch it in a clean tray and pour it back in. As for the hose diameter, not a clue, sorry!
Logged
Classic Green Corrado VR6 Storm | Jetex Cat back | BMC CDA | VT mounts | Bilstein B12 | 288mm front brakes | Mk4 rear brakes | Goodridge braided hoses | BBS RX228s | Shortshifter | Lupo wipers | Uprated headlight loom | All red rears | Refreshed leather | Fresh paint |

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: replacing coolant hose
« Reply #2 on: 06 January 2011, 00:02 »
Worth replacing the coolant / antifreeze at the same time to be honest.
Logged
Pages: [1]
« previous next »