5x100 on 4x100?? with adaptors what et wheels?

[davies1644]

Right looking at getting a set of wheels but will need an adaptor to make them fit wheels have a n offest of et43 wheel is 16" and 7J would these fit? as i need adaptors which are 20mm??

[les.tansey]

I might be wrong but I think that would make your cars wheels overall offset et23 which would mean your wheels would stick out quite far..

I think this is right, hope it helps,

Cheers, Les.

[dom]

Right looking at getting a set of wheels but will need an adaptor to make them fit wheels have a n offest of et43 wheel is 16" and 7J would these fit? as i need adaptors which are 20mm??

It depends on how low you are but et23 should be ok as long as your not stupidly low. As Les said the wheel will be closer to the arch, but 7J isn't very wide so should still give you clearance, what width tyres you running?

[Wayne]

Don't think you can get 4x100 to 5x100 

[dom]

Don't think you can get 4x100 to 5x100 

  I completely missed that

[davies1644]

you can get 4x100 to 5x100 fk do them and dont know bout tyres yet problem is im 120mm lows lol

[Wayne]

you can get 4x100 to 5x100 fk do them and dont know bout tyres yet problem is im 120mm lows lol

I stand corrected, FK do make them.

ET23 is going to be mega tight running it that low, arch mods will be needed unless you find wheels that are a better offset.

Why do you want to run 5stud.

Only other option is to convert to 5stud.

[dom]

I reckon you'll need stretch and arch work to get them under the arches tbh

[LowlifeDubber]

Just change over to 5 stud.VR6 288mm up front and just change the stub axles on the back.Simples

[Wayne]

Just change over to 5 stud.VR6 288mm up front and just change the stub axles on the back.Simples

He is running drums so will need to convert to discs.