« previous next »
Pages: 1 [2]

Author Topic: Blocked heater matrix  (Read 3546 times)

Offline rubjonny

  • 10k hero
  • *
  • Posts: 16,349
  • Hello, my name is John and I'm a dub addict.
Re: Blocked heater matrix
« Reply #10 on: 12 January 2011, 09:57 »
yeah thats the oily coating on the matrix burning off, you need to clean the matrix thoroughly before you fit to remove it. it will burn off though, eventually  :grin:
Logged
Hello my name is John and I'm a dub addict.

Offline rob.043

  • Here all the time
  • ****
  • Posts: 496
Re: Blocked heater matrix
« Reply #11 on: 12 January 2011, 10:48 »
Have you driven far with the new matrix fitted and definately got all the air out? It took a bit of squeesing of pipes and driving of miles to get mine fully bled. But if you have a new matrix and no bypass valves, you should have a hot car pretty soon!
Logged

Offline TreadGingerly

  • Not said much yet
  • **
  • Posts: 20
Re: Blocked heater matrix
« Reply #12 on: 28 January 2011, 13:39 »
It's on ebay !! Going to put the money into my T25. Traitor!!  :grin:
Logged

Offline mr mk2

  • GTI forum regular
  • ***
  • Posts: 190
Re: Blocked heater matrix
« Reply #13 on: 28 January 2011, 14:13 »
i had a simmilar problem and it was 1 of the 3 way adapters that fit onto the heater pipes under the bonnet had blocked so after a quick trip to the scrappy hay presto all sorted
Logged

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Blocked heater matrix
« Reply #14 on: 28 January 2011, 16:17 »
Quote from: TreadGingerly on 28 January 2011, 13:39
It's on ebay !! Going to put the money into my T25. Traitor!!  :grin:

 :rolleyes: I am sure it would sort itself out in the end.
Logged

Offline Mr Blue

  • Forum addict
  • *
  • Posts: 6,133
Re: Blocked heater matrix
« Reply #15 on: 28 January 2011, 20:40 »
this problem has come up again.

colling system has no leaks.

when giving it some on the motorway it gets warm. once slow it gets colder?

waterpump is new, thermostat new, engine temp never goes past the middle.
hope its not the matrix
Logged
:)

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Blocked heater matrix
« Reply #16 on: 28 January 2011, 23:28 »
Quote from: Mr Blue on 28 January 2011, 20:40
this problem has come up again.

colling system has no leaks.

when giving it some on the motorway it gets warm. once slow it gets colder?

waterpump is new, thermostat new, engine temp never goes past the middle.
hope its not the matrix

Try another / genuine thermostat 1st
Logged

gixer1400

  • Guest
Re: Blocked heater matrix
« Reply #17 on: 29 January 2011, 23:46 »
have you checked that the heater flaps are in good condition ?

if not the heat level will be miserly and for some reason the temperature gauge will show a low level or not

move at all  :shocked:

take out the center vents; very easy to do ; shine a torch down the vents and move the control lever to

see if the foam on the flaps has perished  :huh:

if so you need to sort them out ; see any of the guides to help you  ; its worth the time spent  :cool:
Logged

Offline Reasty

  • I live here
  • *****
  • Posts: 1,070
  • Alpine white valver.
Re: Blocked heater matrix
« Reply #18 on: 30 January 2011, 18:48 »
I had a similar problem today,got the car out after 6 months in the garage and had no heat from the heaters at all,i put a new matrix in before she went away for winter so i knew that was fine,i solved the issue by disconecting the return pipe from the valve as it was not hot at all,firstly alot of cold water came out then there was a surge of slush and water then the water was so bloody hot it scolded my thumb so i did have a blockage in the matrix,i wouldnt advise what i did as it hurt ALOT but now its well toasty again  :grin:
Logged
Pages: 1 [2]
« previous next »