« previous next »
Pages: [1]

Author Topic: VR6 ABS issue  (Read 836 times)

VW BUSH

  • Guest
VR6 ABS issue
« on: 28 September 2010, 19:05 »
Right,

All sensors changed
Rings cleaned
No fault codes
ECU Reset

ABS light comes on but no vibration from the pedal preceding it.
Where do I go next?  :smiley:

P reg VR6
Logged

Offline AudiA8Quattro

  • Forum addict
  • *
  • Posts: 4,776
Re: VR6 ABS issue
« Reply #1 on: 28 September 2010, 20:34 »
I would put the car on VAG com measuring blocks to check if it is registering each wheel speed.
Is the ABS light on all the time? i take it the brakes are locking up.
Logged
FOR DIY GUIDES GO TO <br>www.volkswagenaudi.co.uk<br/>BRAKES, SUSPENSION, CV JOINTS

VW BUSH

  • Guest
Re: VR6 ABS issue
« Reply #2 on: 28 September 2010, 21:18 »
Have not had the right time to test the brakes yet, but the light comes on at ignition and stays on or just comes on while driving. I have a signal from each sensor too......
Logged

Offline AudiA8Quattro

  • Forum addict
  • *
  • Posts: 4,776
Re: VR6 ABS issue
« Reply #3 on: 28 September 2010, 21:20 »
Get someone to read the wheel speed on each wheel on VAG com, or have you already done that?
If all else fails i suspect the problem is the ECU.
Logged
FOR DIY GUIDES GO TO <br>www.volkswagenaudi.co.uk<br/>BRAKES, SUSPENSION, CV JOINTS

VW BUSH

  • Guest
Re: VR6 ABS issue
« Reply #4 on: 28 September 2010, 21:26 »
Vag com shows wheel speed in normal limits, what about relays or abs pump?
Logged

Offline AudiA8Quattro

  • Forum addict
  • *
  • Posts: 4,776
Re: VR6 ABS issue
« Reply #5 on: 28 September 2010, 22:02 »
OBDII has pump and ECU as one unit.
You could try the relay, but i suspect the ECU.
Logged
FOR DIY GUIDES GO TO <br>www.volkswagenaudi.co.uk<br/>BRAKES, SUSPENSION, CV JOINTS

Offline jimmyb

  • GTI forum regular
  • ***
  • Posts: 220
Re: VR6 ABS issue
« Reply #6 on: 30 September 2010, 18:08 »
maybe a dodgy abs pump,is the light on all the time? was it on when it was vag-commed?
Logged
Pages: [1]
« previous next »