4 branch

[apie2004]

Hey, I bought an ebay special 4 branch manifold and I am starting to regret it all ready. I bought the manifold and it didnt have a picture just a stock image of a manifold. Long story short, I dont have a flexi joint or a pipe between the manifold and the exhaust and they want £45 for the pipe which I feel it should have came with. I could be wrong, where else could I go for this?

tldr: I have been a retard

[emery1990]

how much did ya pay for just the manifold then.

You could always send yours back and ill sell ya mine for £100 posted  Its a jetex i was told, but should it have a jetex marking on it? as i cant find one?

[apie2004]

I could get one for £80 where I am

[rob.043]

just buy a length of flexi pipe of the correct diameter, and clamp or weld it to the manifold. Have a look on ebay, there are lods of flexi joints listed is all sorts of sizes. Should get something delivered for sub £20.

[emery1990]

Get it then, instead of ponsing around making one up lol surely it cant be much cheaper than £80.

[apie2004]

Here is the problem, I have already purchased a brand spanking manifold but I have a feeling that either the previous owner of my car has pikey'd the exhaust. What should I have underneath. I have standard manifold, then twin pipes running for about 80cm down the length of the car. New manifold wont reach that 80cm. Any suggestions?

Cheers

James

[emery1990]

Thats what i have mate i think, a manifold, the flange joint bit then two pipes go under the car out site into a box then out of the box in a single pipe to connect to the stainless exhaust. Is your new manifold just the top bit then ?
 
or does it look like this one?

[apie2004]

Just the top bit.

[apie2004]

Turns out I have a cat 4 branch. What a twit I am