Where to feed Vac pipe for Boost Gauge

[Hulmie]

Wheres the best place to feed the Vac pipe through the bulk head on a 1.8T to connect to a boost gauge in the drivers vent?

[T_J_G]

Not the bonnet release cable grommit

[Adam]

Not the bonnet release cable grommit

Agreed! Nor down the wing and into the door.

Best off putting it though the fuse box. Remove the scuttle pannel on the OS and put it down though the black box.

[Hulmie]

was looking at the bonnet cable grommit but thought it wasnt a good idea. i dont have a black box but i do have a white box, take it theres a grommit in there i can push it through. Where abouts would it come through on the inside of the car?

[Adam]

was looking at the bonnet cable grommit but thought it wasnt a good idea. i dont have a black box but i do have a white box, take it theres a grommit in there i can push it through. Where abouts would it come through on the inside of the car?

That's the one. It comes out behind the fuse box.

[MaXXeH]

i did mine though the bonnet gromit, no problems here.

[Wazzzer]

fuse box for me, dunno where it comes out, it was just there when I looked under the dash lol

[northeast_gti-t]

took mine in through the top fuse box theres a spare grommet under the main one iirc i went through that and pushed down and the vac line comes out behind the fuse box on the drivers side end panel  just a case of feeding your pipe up to the vent then paul 

[Hulmie]

Cheers peeps, just have to get me some longer vac pipe.

[seanbmx]

Ok so I've had a look at the fuse box and how the fudge I am supposed to get the vac pipe thru their??