Had a day off today so thought id try and tackle my bloody power steering!
First things first had to go to Halfords to buy a trolley jack and some axle stands as i haven't got any which kind of prevents me from doing any kind of work on the car! Lucky I found my Halfords trade card

so saved some money on that and while i was there picked up some new PAS Fluid

Drained the fluid out and well it didn't look to healthy!

topped it all up and bled the system, now when on full lock the car still squeaks to hell so had a look and see what i could see,

So had a little go at the bolts holding the pas pump in place but they we seized solid! the tension on the actual belt seem a bit slack so tightened the tension bolt a bit got the car down and took it for a spin, needless to say didn't make feck all difference! Jacked the car back up and then realized there was a small bolt behind the the tension arm so loosened this a bit then tightened the tension bolt then re tightened the bolt
Take 2, although it still squeaks at least i have made some improvement i don't have to fight the steering wheel so much when stationary!
still need to fit the spare pump i have but will leave that for another day
next things to do:
Major serivce!!
oh and here is what is currently in my room

