Electric windows go down but not up!

[VR6_Wherry]

Right guys bit of an issue here!

I'm trying to install my alarm when i must have connected some wrong wires...i heard a little pop and sure enough i blew a fuse. Looked through the fusebox an found it was number 20. This did the inside electrics, replaced and now is all good.

BUT now with the buttons i can only get the windows to go down and not up! if i leave the key in the door they go up and down...so i know it's not the regulators have i blown a relay?

Help please!!! 

[kells]

sounds like a earth problem

[VR6_Wherry]

I'm bumping this back up as i still haven't fixed this issue after a year and 7 months! been real lazy!! 

[tweed]

I take it both door switches don't go up? must be a relay

[VR6_Wherry]

I take it both door switches don't go up? must be a relay

Nope, they only go down. If i press up it stops them going down (normal)

I thought relay but can't find anything about them?

[tweed]

to be honest i aint got a clue 

[trog_nfs]

Sounds like you melted a wire somewhere to be honest. 

[VR6_Wherry]

 

I'm looking around and can't find a fcuking thing! 

Looks like soldering iron will be out tomorrow and i will be pulling everything out!

I guess when i press the button to just see which one is clicking? Or is that the motor that clicks?

[Bellend]

No relays all done internal to the motor electrics.

You cut through a wire somewhere?

Taken the connections off and back on?

[dan-swire1908]

Had this problem in mine about three weeks ago.. turned out to be the pins in the drivers door switch were loose in the multiplug and not making a good enough connection to the switch. Try and get yourself some form of power probe and attempt to operate the windows using that. Failing that a short piece of wire to complete the circuits should sufice.