ABS Light on - Vag-Com says Communication Error?

[billabong]

Hi peeps,
Anybody have any ideas what could be wrong?

Please see the below Vag-Com report

Many Thanks

Will

VAG-COM Version: Release  311.2-N

Chassis Type: 1H - VW G/J/V Mk3
Scan: 01,02,03,08,15,25,56
 
Address 01     -------------------------------------------------------
   Controller: 037 906 025 A 
   Component: SIMOS 4S           1823
   Coding: 00003
   Shop #: WSC 10001
No fault code found.

Address 03     -------------------------------------------------------
   Controller:
   Note: Excessive Comm Errors

Skipping Address 15-Airbags

Address 25     -------------------------------------------------------
   Controller: 1H0 953 257  B
   Component: IMMO VWZ3Z0S0058874 V00
   Coding: 09600
   Shop #: WSC 00000
No fault code found.

End   -------------------------------------------------------

[javalin]

bad ground(s) on the ECU(s), or bad comms wiring to the ABS ECU.  I would suspect its after the normal ECU (in the scuttle tray) or you'd have problems with both.  Probably worth checking at the ABS ECU end first.

James

[Lukeabercynonnoi]

Might be worth a try :S But lift the rear seats up and make sure that the both ABS sensors are plugged in :S