Quote from: Steve30 on 04 April 2010, 08:59Quote from: VWKev on 04 April 2010, 01:35Quote from: Guy on 04 April 2010, 01:17Quote from: VWKev on 04 April 2010, 00:04How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.you're supposed to moisten the microfibre a bit when you take it off numbnutz!! didn't you translate the instructions?! I did numbnutz Eh no, your supposed to moisten it when you buff off the sealant, not the cleaner.Yes Kev, I used a microfibra which was moist to do both applications no problems mate, My back window & side windows are tinted anyway standard on the GTD, but front window no problems there. It save's usieng the wipers , well you dont need them with this stuff!! Esp doing over 30mph just beads off!! Instructions didnt say to moisten both, oh well, will do that next time then.
Quote from: VWKev on 04 April 2010, 01:35Quote from: Guy on 04 April 2010, 01:17Quote from: VWKev on 04 April 2010, 00:04How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.you're supposed to moisten the microfibre a bit when you take it off numbnutz!! didn't you translate the instructions?! I did numbnutz Eh no, your supposed to moisten it when you buff off the sealant, not the cleaner.Yes Kev, I used a microfibra which was moist to do both applications no problems mate, My back window & side windows are tinted anyway standard on the GTD, but front window no problems there. It save's usieng the wipers , well you dont need them with this stuff!! Esp doing over 30mph just beads off!!
Quote from: Guy on 04 April 2010, 01:17Quote from: VWKev on 04 April 2010, 00:04How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.you're supposed to moisten the microfibre a bit when you take it off numbnutz!! didn't you translate the instructions?! I did numbnutz Eh no, your supposed to moisten it when you buff off the sealant, not the cleaner.
Quote from: VWKev on 04 April 2010, 00:04How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.you're supposed to moisten the microfibre a bit when you take it off numbnutz!! didn't you translate the instructions?! I did
How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.
Quote from: VWKev on 04 April 2010, 12:49Quote from: Steve30 on 04 April 2010, 08:59Quote from: VWKev on 04 April 2010, 01:35Quote from: Guy on 04 April 2010, 01:17Quote from: VWKev on 04 April 2010, 00:04How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.you're supposed to moisten the microfibre a bit when you take it off numbnutz!! didn't you translate the instructions?! I did numbnutz Eh no, your supposed to moisten it when you buff off the sealant, not the cleaner.Yes Kev, I used a microfibra which was moist to do both applications no problems mate, My back window & side windows are tinted anyway standard on the GTD, but front window no problems there. It save's usieng the wipers , well you dont need them with this stuff!! Esp doing over 30mph just beads off!! Instructions didnt say to moisten both, oh well, will do that next time then.For the money the wax is not long lasting IMO?? Buts its good expensive though??
Quote from: Steve30 on 04 April 2010, 14:36Quote from: VWKev on 04 April 2010, 12:49Quote from: Steve30 on 04 April 2010, 08:59Quote from: VWKev on 04 April 2010, 01:35Quote from: Guy on 04 April 2010, 01:17Quote from: VWKev on 04 April 2010, 00:04How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.dodojuice supernatural ? Its very good nice shine, but not long lasting?? what do you think Kev?you're supposed to moisten the microfibre a bit when you take it off numbnutz!! didn't you translate the instructions?! I did numbnutz Eh no, your supposed to moisten it when you buff off the sealant, not the cleaner.Yes Kev, I used a microfibra which was moist to do both applications no problems mate, My back window & side windows are tinted anyway standard on the GTD, but front window no problems there. It save's usieng the wipers , well you dont need them with this stuff!! Esp doing over 30mph just beads off!! Instructions didnt say to moisten both, oh well, will do that next time then.For the money the wax is not long lasting IMO?? Buts its good expensive though?? What wax ?
Quote from: VWKev on 04 April 2010, 12:49Quote from: Steve30 on 04 April 2010, 08:59Quote from: VWKev on 04 April 2010, 01:35Quote from: Guy on 04 April 2010, 01:17Quote from: VWKev on 04 April 2010, 00:04How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.dodojuice supernatural ? Its very good nice shine, but not long lasting?? what do you think Kev?you're supposed to moisten the microfibre a bit when you take it off numbnutz!! didn't you translate the instructions?! I did numbnutz Eh no, your supposed to moisten it when you buff off the sealant, not the cleaner.Yes Kev, I used a microfibra which was moist to do both applications no problems mate, My back window & side windows are tinted anyway standard on the GTD, but front window no problems there. It save's usieng the wipers , well you dont need them with this stuff!! Esp doing over 30mph just beads off!! Instructions didnt say to moisten both, oh well, will do that next time then.For the money the wax is not long lasting IMO?? Buts its good expensive though??
Quote from: Steve30 on 04 April 2010, 08:59Quote from: VWKev on 04 April 2010, 01:35Quote from: Guy on 04 April 2010, 01:17Quote from: VWKev on 04 April 2010, 00:04How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.dodojuice supernatural ? Its very good nice shine, but not long lasting?? what do you think Kev?you're supposed to moisten the microfibre a bit when you take it off numbnutz!! didn't you translate the instructions?! I did numbnutz Eh no, your supposed to moisten it when you buff off the sealant, not the cleaner.Yes Kev, I used a microfibra which was moist to do both applications no problems mate, My back window & side windows are tinted anyway standard on the GTD, but front window no problems there. It save's usieng the wipers , well you dont need them with this stuff!! Esp doing over 30mph just beads off!! Instructions didnt say to moisten both, oh well, will do that next time then.
Quote from: VWKev on 04 April 2010, 01:35Quote from: Guy on 04 April 2010, 01:17Quote from: VWKev on 04 April 2010, 00:04How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.dodojuice supernatural ? Its very good nice shine, but not long lasting?? what do you think Kev?you're supposed to moisten the microfibre a bit when you take it off numbnutz!! didn't you translate the instructions?! I did numbnutz Eh no, your supposed to moisten it when you buff off the sealant, not the cleaner.Yes Kev, I used a microfibra which was moist to do both applications no problems mate, My back window & side windows are tinted anyway standard on the GTD, but front window no problems there. It save's usieng the wipers , well you dont need them with this stuff!! Esp doing over 30mph just beads off!!
Quote from: Guy on 04 April 2010, 01:17Quote from: VWKev on 04 April 2010, 00:04How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.dodojuice supernatural ? Its very good nice shine, but not long lasting?? what do you think Kev?you're supposed to moisten the microfibre a bit when you take it off numbnutz!! didn't you translate the instructions?! I did numbnutz Eh no, your supposed to moisten it when you buff off the sealant, not the cleaner.
Quote from: VWKev on 04 April 2010, 00:04How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.dodojuice supernatural ? Its very good nice shine, but not long lasting?? what do you think Kev?you're supposed to moisten the microfibre a bit when you take it off numbnutz!! didn't you translate the instructions?! I did
What you smoking Steve ?
