Best wax for Candy white?

[Dan J]

yeah get your pics out for the lads.

      

[Steve30]

yeah get your pics out for the lads.

Just as I put the wax on it today , it just P***ed it down all afternoon, Gutted!! But it does bead off well, also got some of that Car laquer for windscreen, The jury's out on that one at the moment. I think you just need to be doing about 40-50mph to get full benefit's from it?? I will try and put another coat on when its stopped raining. Lookig at the weather April showers the bloody rainy season now sick of it.   

[Dan J]

yeah get your pics out for the lads.

Just as I put the wax on it today , it just P***ed it down all afternoon, Gutted!! But it does bead off well, also got some of that Car laquer for windscreen, The jury's out on that one at the moment. I think you just need to be doing about 40-50mph to get full benefit's from it?? I will try and put another coat on when its stopped raining. Lookig at the weather April showers the bloody rainy season now sick of it.   

carlack 68 is good stuff dude make sure you give the car a quick wash before you apply another layer of wax as theres grit in the rain and you could end up scratching your car

[Steve30]

yeah get your pics out for the lads.

Just as I put the wax on it today , it just P***ed it down all afternoon, Gutted!! But it does bead off well, also got some of that Car laquer for windscreen, The jury's out on that one at the moment. I think you just need to be doing about 40-50mph to get full benefit's from it?? I will try and put another coat on when its stopped raining. Lookig at the weather April showers the bloody rainy season now sick of it.   

carlack 68 is good stuff dude make sure you give the car a quick wash before you apply another layer of wax as theres grit in the rain and you could end up scratching your car

Yes the car lack is very good , much better than the rain X rubbish , its good stuff and worth buying !! 

[VWKev]

How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered  Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.

[Dan J]

How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered  Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.

lolz

[Guy]

How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered  Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.

you're supposed to moisten the microfibre a bit when you take it off numbnutz!! didn't you translate the instructions?! 

I did

[VWKev]

How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered  Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.

you're supposed to moisten the microfibre a bit when you take it off numbnutz!! didn't you translate the instructions?! 

I did

numbnutz 

Eh no, your supposed to moisten it when you buff off the sealant, not the cleaner.

[Steve30]

How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered  Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.

you're supposed to moisten the microfibre a bit when you take it off numbnutz!! didn't you translate the instructions?! 

I did

numbnutz 

Eh no, your supposed to moisten it when you buff off the sealant, not the cleaner.

Yes Kev, I used a microfibra which was moist to do both applications no problems mate, My back window & side windows are tinted anyway standard on the GTD, but front window no problems there. It save's usieng the wipers , well you dont need them with this stuff!! Esp doing over 30mph just beads off!! 

[VWKev]

How tough a job is it to put carlack68 on though, I put it on today, the cleaner I thought was gonna be the hard bit, working it in swirl motions vigourously was a bit tiring, then the buff off when it turns grey ? I mean come on I was cream crackered  Then the sealant, ok that bit was fairly straight forward but I was still zonked from the clean part.

you're supposed to moisten the microfibre a bit when you take it off numbnutz!! didn't you translate the instructions?! 

I did

numbnutz 

Eh no, your supposed to moisten it when you buff off the sealant, not the cleaner.

Yes Kev, I used a microfibra which was moist to do both applications no problems mate, My back window & side windows are tinted anyway standard on the GTD, but front window no problems there. It save's usieng the wipers , well you dont need them with this stuff!! Esp doing over 30mph just beads off!! 

Instructions didnt say to moisten both, oh well, will do that next time then.