Ok, so spent a good 5 hours cleaning/polishing the car this evening!
Started with a covering of magifoam snowfoam, followed by a wash with chemical guys shampoo and then clayed using a megs clay kit. The wheels were treated with bilberry wheel cleaner (although need more attention still).
At this point I rolled it into the garage to begin on the polishing


I tried (and failed) to get decent shots of all the swirl marks that there were in the paint:

Next up I hit it with the DA, it had 4-5 passes with Menzerna final finish on a buffing pad, then the same again on a finishing pad, followed by a hand applied coat of dodo juice lime prime and sealed with collinite 476. So far I have done the bonnet, and the entire offside, so still need to do the roof, nearside and boot. I've removed about 60% of the defects in the paint, so I need a slightly more abrasive polish really.
Anyway, a couple of pics for the moment. I'll get some better ones when the job is finished and it is light outside! The trim has been treated with Autoglym stuff, and the repaired VR6 splitter will be going back on tomorrow also.


