Dom069 - My 8v Story So Far - Deposit Taken :(

[jeremybarker]

A+ for taking the time to colour co-ordinate the knobs from your wardrobe 

[dom]

A+ for taking the time to colour co-ordinate the knobs from your wardrobe 

  It just so happens that my dad is a joiner (handy eh!) and he made the wardrobe/draws and had some knobs left over. So when I came to make the desk and needed some knobs for it, bingo! 

[Shady Pioneer]

A+ for taking the time to colour co-ordinate the knobs from your wardrobe 

Admittedly Dom, whatever excuse you try to use, it's still pretty gay. 

[dom]

A+ for taking the time to colour co-ordinate the knobs from your wardrobe 

Admittedly Dom, whatever excuse you try to use, it's still pretty gay. 

 

[dom]

Got a few little bits and pieces in the post today which will be fitted at the weekend. Nothing exciting, red dice dust caps, golfgti.co.uk tax disc holder and red leds to replace the blue ones behind the mfa display/odometer 

[VR6_Wherry]

Got a few little bits and pieces in the post today which will be fitted at the weekend. Nothing exciting, red dice dust caps, golfgti.co.uk tax disc holder and red leds to replace the blue ones behind the mfa display/odometer 

Fancy doing a little guide with the bulb replacements? 

[dom]

Got a few little bits and pieces in the post today which will be fitted at the weekend. Nothing exciting, red dice dust caps, golfgti.co.uk tax disc holder and red leds to replace the blue ones behind the mfa display/odometer 

Fancy doing a little guide with the bulb replacements? 

Yeah no probs, i'll take some pics as I do it! I've done it so many times now that I could do it blindfolded! 

Also I have 2 different types of clocks that I can do it with, 1 with hex screws and 1 that the back just clips off!

[Khare]

It's easy changing the bulbs mate. The 16v clocks however (VR6 will be the same I guess) have soldered bulbs rather than twist fit.

I need to sort out one of my blue bulbs when I get back, rev counter one is loose and works sometimes.

[dom]

It's easy changing the bulbs mate. The 16v clocks however (VR6 will be the same I guess) have soldered bulbs rather than twist fit.

I need to sort out one of my blue bulbs when I get back, rev counter one is loose and works sometimes.

Yeah i've changed all mine already, just throwing in some different colours now to mix it up a bit. I've seen those soldered in ones (possibly in Kell's dubrides thread?!), they look like an absolute b!tch to sort out! 

I'm gonna invest in another set of heater controls and windows switches etc so have a play with.

[tdi_blu]

Ive just removed the green film bit out of my clocks which brigtens them up a lot.Wouldnt mind doing the red bulbs so ill look out for your piccys