Stage2 R-tech Boost Levels

[Grand Master Patch]

Anyone on here running a stage2 map and a boost gauge? What psi are you getting?

[DarkGti]

stage 2 do you mean agu ko3s? if so mine boosts just over 1.5 bar

[Grand Master Patch]

Yes,i guess it would be the same for an AUM. 21psi sounds good to me

[topher]

it should hang at 20-21psi briefly then settle to 16-18 until pretty much red-line

remember the agu head flows marginally better so pressure may be lower but volume is the same.

airflow=everything

[DarkGti]

what n-valve you running? when i had mine remapped by r-tech it i was running the n75-j and was boosting at 27psi which nick said that was over boosting and reccomened me to put the original valve back on but the f-h should be fine for 22- 25!

[Grand Master Patch]

I'm on the original,had a look at weekend and it's the C version.Ohhhh all this boost,bring it on

[Wazzzer]

Mine holds at about 17psi after the run this evening, didn't see what it peaked at as I was looking out for the old bill who seemed to be everywhere lol

I also ran out of road as the 200m of dual carriageway was a bit busy, guess I'm gonna have to wait for the RR day

I run a standard C valve

[Grand Master Patch]

it should hang at 20-21psi briefly then settle to 16-18 until pretty much red-line

remember the agu head flows marginally better so pressure may be lower but volume is the same.

airflow=everything

Very true,basically boost is just back pressure that is in the system that isnt used by the engine.

[Wazzzer]

How long you got to wait until you get yours done mate?

[Grand Master Patch]

It's getting mapped on friday