Author Topic: RCD 300 to RCD 310 3rd Gen Stereo! Help Needed!  (Read 7991 times)

Offline HasH

  • GTI forum regular
  • ***
  • Posts: 151
RCD 300 to RCD 310 3rd Gen Stereo! Help Needed!
« on: 26 July 2009, 08:47 »
Hello. i have just purchased a brand new RCD 310 off of ebay to replace my RCD 300 in my mk5 2006 golf. now i have discovered you need a new can bus gateway and antenna adapter. The can bus needs to be of L revision on newer aparently...i have a part number i picked up from another site... 1k0907530S. Using ETKA iv noticed you can type in 1k0907530 with a whole load of letter on the end "M,N,O,P,Q,R,S,T etc" and the same gateway come up. im guessing this is how you order a L revision or higher. I just want to clarify, if i order say an S "1k0907530S" will this work and stop me getting the 1.4v power drain. my local VW dealer quoted the part at £116

any help very much appriciated. thankyou,

ash

Offline cameluk

  • Not said much yet
  • **
  • Posts: 46
Re: RCD 300 to RCD 310 3rd Gen Stereo! Help Needed!
« Reply #1 on: 26 July 2009, 21:06 »
Everything points to having a gateway with a version of L or above. So if you ask for 1K0907530S than that version will work

Is it any cheaper from here http://www.skodateile.cz/index.php?pg=product&prod=153&menu=%A9koda%7COctavia%20II%28A5%29%7CDal%B9%ED%20p%F8%EDslu%B9enstv%ED

Offline HasH

  • GTI forum regular
  • ***
  • Posts: 151
Re: RCD 300 to RCD 310 3rd Gen Stereo! Help Needed!
« Reply #2 on: 01 August 2009, 11:28 »
Everything points to having a gateway with a version of L or above. So if you ask for 1K0907530S than that version will work

Is it any cheaper from here http://www.skodateile.cz/index.php?pg=product&prod=153&menu=%A9koda%7COctavia%20II%28A5%29%7CDal%B9%ED%20p%F8%EDslu%B9enstv%ED

cameluk, i dont suppose you know the location of the can bus on an 2006 tdi140 gt? thankyou

Offline rskardon

  • GTI forum regular
  • ***
  • Posts: 155
Re: RCD 300 to RCD 310 3rd Gen Stereo! Help Needed!
« Reply #3 on: 01 August 2009, 17:13 »
I was looking into this same question as i am going to get an RCD 510, but I was just told on another forum that you dont need to change the canbus and the unit is plug and play, is it different for the 310?

Cheers,

R

Offline HasH

  • GTI forum regular
  • ***
  • Posts: 151
Re: RCD 300 to RCD 310 3rd Gen Stereo! Help Needed!
« Reply #4 on: 01 August 2009, 17:15 »
I was looking into this same question as i am going to get an RCD 510, but I was just told on another forum that you dont need to change the canbus and the unit is plug and play, is it different for the 310?

Cheers,

R

im not sure with the 510...have a look

http://www.my-gti.com/1101/upgrading-2nd-generation-radios-rcd-300-rcd-500-to-3rd-generation-rcd-210-rcd-310-rns-310-rcd-510-power-drain-issue

Offline rskardon

  • GTI forum regular
  • ***
  • Posts: 155
Re: RCD 300 to RCD 310 3rd Gen Stereo! Help Needed!
« Reply #5 on: 01 August 2009, 17:25 »
Thanks for that, did you try the new unit without the can bus change first?

Cheers,

R

Offline HasH

  • GTI forum regular
  • ***
  • Posts: 151
Re: RCD 300 to RCD 310 3rd Gen Stereo! Help Needed!
« Reply #6 on: 01 August 2009, 17:27 »
no. i had read up on a few forums. and it seems quite a few people with revision previous to L all had the battery drain!