« previous next »
Pages: [1] 2

Author Topic: Windscreen scuttle panel seal  (Read 6637 times)

Offline Mikester

  • Forum addict
  • *
  • Posts: 6,427
  • Civic Type R
Windscreen scuttle panel seal
« on: 10 July 2009, 21:14 »
Mine is starting to lift up, and look mega worn?

Are these replaced with the windscreen? Or can it be done seperatly?

Worried its getting water down there, which isnt going to be good im sure.

What can i do?

Mike
Logged

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Windscreen scuttle panel seal
« Reply #1 on: 10 July 2009, 23:40 »
Part of the windscreen seal from memory, your best bet is to try a local glass company and see if they can replace it.
Logged

Offline Guy

  • Forum addict
  • *
  • Posts: 6,118
Re: Windscreen scuttle panel seal
« Reply #2 on: 12 July 2009, 09:22 »
its part of the scuttle panel mike and not part of the windscreen

about 70 notes from a main dealer but well worth it as it does smarten up the front of the car
Logged

Offline ace

  • I live here
  • *****
  • Posts: 604
Re: Windscreen scuttle panel seal
« Reply #3 on: 12 July 2009, 10:06 »
yeah it is part of the scuttle, as i found out!!!!!

think was about 70ish like guy said, will have a look when i get back from work.
Logged

Offline ace

  • I live here
  • *****
  • Posts: 604
Re: Windscreen scuttle panel seal
« Reply #4 on: 12 July 2009, 16:10 »
part numbers for the scuttle

W1H2 819 416 CB 41 DEFLECTOR £23.04 +VAT
W1H2 819 415 BB 41 WATER DEFLECTOR £32.54 +VAT

Logged

Offline VR6-Joe

  • I live here
  • *****
  • Posts: 3,638
Re: Windscreen scuttle panel seal
« Reply #5 on: 12 July 2009, 16:25 »
If this is the actual plastic scuttle panel cover thingy you're on about then I'll check the condition of the one on the TDI..
Logged
Gone but not forgotten;
1983 Mk1 Golf GX - 1991 Mk2 Golf GTI - 1988 Scirocco Scala - 1989 Mk2 Golf CL - 1993 Mk3 Golf Ryder - 1996 Mk3 Golf SE - 1996 Mk3 Golf CL - 1995 Mk3 Golf GTI 16v - 1996 Mk3 Golf VR6 Highline - 2003 Saxo VTR - 1996 Mk3 Golf VR6

Offline Mikester

  • Forum addict
  • *
  • Posts: 6,427
  • Civic Type R
Re: Windscreen scuttle panel seal
« Reply #6 on: 12 July 2009, 17:49 »
Cheers ace. So both of those parts are needed? If so I might get it new from dealer, along with having a new screen fitted I reckon. Cheers :)
Logged

Offline ace

  • I live here
  • *****
  • Posts: 604
Re: Windscreen scuttle panel seal
« Reply #7 on: 12 July 2009, 18:46 »
yeah basically its the left and right side of the scuttle.
Logged

Offline Mikester

  • Forum addict
  • *
  • Posts: 6,427
  • Civic Type R
Re: Windscreen scuttle panel seal
« Reply #8 on: 12 July 2009, 21:56 »
Cheers :)
Logged

Offline Guy

  • Forum addict
  • *
  • Posts: 6,118
Re: Windscreen scuttle panel seal
« Reply #9 on: 12 July 2009, 23:20 »
as said - both parts are needed

check to see if it comes with the clips too... like overgrown plastic screws... don't put old faded ones in with your new scuttle panel

while you are there check your wiper nut covers and replace them at the same time if they have gone grey... cost is minimal but they won't stand out then against the nice black panel
Logged
Pages: [1] 2
« previous next »