« previous next »
Pages: [1] 2

Author Topic: can anyone verify kent gs23h cam duration?  (Read 1926 times)

Offline Khare

  • Serious forum addict
  • *
  • Posts: 7,627
  • The bear that khares
can anyone verify kent gs23h cam duration?
« on: 07 July 2009, 16:24 »
276 or 285?

Bought via internet marked as a 276 cam, got it through and on the manual that it came with says its a 285. Which ever the two, it works wonders  :laugh:

Cheers
Logged

Offline Adam

  • Forum addict
  • *
  • Posts: 5,194
Re: can anyone verify kent gs23h cam duration?
« Reply #1 on: 07 July 2009, 16:30 »
Quote from: Khare on 07 July 2009, 16:24
276 or 285?

Bought via internet marked as a 276 cam, got it through and on the manual that it came with says its a 285. Which ever the two, it works wonders  :laugh:

Cheers

Have you fitted it?
Logged

Down Hill From Here.

Offline Khare

  • Serious forum addict
  • *
  • Posts: 7,627
  • The bear that khares
Re: can anyone verify kent gs23h cam duration?
« Reply #2 on: 07 July 2009, 16:36 »
yup. fitted it yesterday evening dude  :smiley:
Logged

Offline Horney

  • 10k hero
  • *
  • Posts: 10,782
  • Racing, Trackdays, Starwars.
Re: can anyone verify kent gs23h cam duration?
« Reply #3 on: 07 July 2009, 16:39 »
It should have been stamped somewhere but a bit late now if you've fitted it!

nick
Logged

Offline Khare

  • Serious forum addict
  • *
  • Posts: 7,627
  • The bear that khares
Re: can anyone verify kent gs23h cam duration?
« Reply #4 on: 07 July 2009, 16:40 »
Quote from: Horney on 07 July 2009, 16:39
It should have been stamped somewhere but a bit late now if you've fitted it!

nick

good point!  :grin:

dam  :sad:
Logged

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: can anyone verify kent gs23h cam duration?
« Reply #5 on: 07 July 2009, 16:42 »
It will be stamped on the end.

However

Application Power Band Cam Lift(mm) Valve Lift(mm) Duration Timing Full Lift VC (mm) LTDC
Sports ' R ' 2500-7000 11.53 11.53 285 Deg  33/72 72/33 110 Deg  0.00 I 1.98mm 

http://www.kentcams.com/
Logged

Offline Khare

  • Serious forum addict
  • *
  • Posts: 7,627
  • The bear that khares
Re: can anyone verify kent gs23h cam duration?
« Reply #6 on: 07 July 2009, 16:44 »
Quote from: Wayne on 07 July 2009, 16:42
It will be stamped on the end.

However

Application Power Band Cam Lift(mm) Valve Lift(mm) Duration Timing Full Lift VC (mm) LTDC
Sports ' R ' 2500-7000 11.53 11.53 285 Deg  33/72 72/33 110 Deg  0.00 I 1.98mm 

http://www.kentcams.com/
nice one. perfect dude  :wink:
Logged

Offline Horney

  • 10k hero
  • *
  • Posts: 10,782
  • Racing, Trackdays, Starwars.
Re: can anyone verify kent gs23h cam duration?
« Reply #7 on: 07 July 2009, 16:45 »
How does it idle? Nice and lumpy?

nick
Logged

Offline Khare

  • Serious forum addict
  • *
  • Posts: 7,627
  • The bear that khares
Re: can anyone verify kent gs23h cam duration?
« Reply #8 on: 07 July 2009, 16:54 »
Quote from: Horney on 07 July 2009, 16:45
How does it idle? Nice and lumpy?

nick

yup, very lumpy! Love it!

Below about 3000rpm theres not much, but when 3000rpm kicks in its like vtec (sounds like it too)! it just pulls all the way to the limiter at over 6000rpm!
Logged

Offline Adam

  • Forum addict
  • *
  • Posts: 5,194
Re: can anyone verify kent gs23h cam duration?
« Reply #9 on: 07 July 2009, 17:23 »
Do a write up please!
Logged

Down Hill From Here.
Pages: [1] 2
« previous next »