« previous next »
Pages: 1 ... 5 6 [7] 8

Author Topic: Lowering debate  (Read 8290 times)

Offline funkyfive

  • I live here
  • *****
  • Posts: 595
Re: Lowering debate
« Reply #60 on: 12 July 2009, 11:22 »
Quote from: Wayne on 12 July 2009, 09:52
Quote from: funkyfive on 12 July 2009, 08:32
As an idea could i use the old spring plates and put the new top mounts on? I've been told the strut housing is all the same on the mk3's!!??

Yes you can reuse the old spring plates.

But would that be ok with the new top mounts?
Logged

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Lowering debate
« Reply #61 on: 12 July 2009, 15:52 »
Quote from: funkyfive on 12 July 2009, 11:22
Quote from: Wayne on 12 July 2009, 09:52
Quote from: funkyfive on 12 July 2009, 08:32
As an idea could i use the old spring plates and put the new top mounts on? I've been told the strut housing is all the same on the mk3's!!??

Yes you can reuse the old spring plates.

But would that be ok with the new top mounts?

Yes, fine
Logged

Offline funkyfive

  • I live here
  • *****
  • Posts: 595
Re: Lowering debate
« Reply #62 on: 12 July 2009, 19:51 »
Quote from: Wayne on 12 July 2009, 15:52
Quote from: funkyfive on 12 July 2009, 11:22
Quote from: Wayne on 12 July 2009, 09:52
Quote from: funkyfive on 12 July 2009, 08:32
As an idea could i use the old spring plates and put the new top mounts on? I've been told the strut housing is all the same on the mk3's!!??

Yes you can reuse the old spring plates.

But would that be ok with the new top mounts?

Yes, fine

Your a star!! Thanks for that as i was getting nervous. I should have guessed there would be issues.
Logged

Offline Wayne

  • Sir Postalot
  • *
  • Posts: 32,051
Re: Lowering debate
« Reply #63 on: 12 July 2009, 22:00 »
No worries, happy to help.
Logged

Offline funkyfive

  • I live here
  • *****
  • Posts: 595
Re: Lowering debate
« Reply #64 on: 13 July 2009, 21:14 »
I think i need the below due to the type of suspension kit

Plates - 1H0 412 341
Threaded Bush - 811 412 365
Top Mounts - 357 412 329
Washer - 171 412 369

My car is an 1995 ADY.
Logged

Offline VR6-Joe

  • I live here
  • *****
  • Posts: 3,638
Re: Lowering debate
« Reply #65 on: 14 July 2009, 06:00 »
I've worked on;
2 1993 Mk3's
1 1994 Mk3
1 1995 Mk3
3 1996 Mk3's

I've chopped and changed suspension more times than I care to remember and I've never came across any problems with spring plates or top mounts, so why you so worried?

I've even put Mk3 suspension on a Mk2 and vise versa without any problems.
Logged
Gone but not forgotten;
1983 Mk1 Golf GX - 1991 Mk2 Golf GTI - 1988 Scirocco Scala - 1989 Mk2 Golf CL - 1993 Mk3 Golf Ryder - 1996 Mk3 Golf SE - 1996 Mk3 Golf CL - 1995 Mk3 Golf GTI 16v - 1996 Mk3 Golf VR6 Highline - 2003 Saxo VTR - 1996 Mk3 Golf VR6

Offline funkyfive

  • I live here
  • *****
  • Posts: 595
Re: Lowering debate
« Reply #66 on: 14 July 2009, 07:24 »
I've never done the suspension myself before. I bought a lowering kit for Mk3's excluding the gti's and VR6 due to the price and that fact it drops it 60mm. The springs plates seem to be different on my car as they are smaller than the ones supplied with the kit and i just want to make sure i do it right e.g use the supplied spring plates with either the new top mounts or buy the other top mounts. The other reason i need to get it right is i have two children and the wife is getting pi**ed off i keep spending lots of time on the car.

So planning and preperation is really important to me.
Logged

Offline VR6-Joe

  • I live here
  • *****
  • Posts: 3,638
Re: Lowering debate
« Reply #67 on: 14 July 2009, 07:37 »
Fair enough buddy..

If spring plates were supplied with the lowering kit like you say they were then you obviously use them with the kit...
As for the top mounts, it doesn't matter what top mounts you use as I believe they all fit the same way and do the same job

I see what you mean about planning and preperation but without trying things out you don't know if it's going to work

:)
Logged
Gone but not forgotten;
1983 Mk1 Golf GX - 1991 Mk2 Golf GTI - 1988 Scirocco Scala - 1989 Mk2 Golf CL - 1993 Mk3 Golf Ryder - 1996 Mk3 Golf SE - 1996 Mk3 Golf CL - 1995 Mk3 Golf GTI 16v - 1996 Mk3 Golf VR6 Highline - 2003 Saxo VTR - 1996 Mk3 Golf VR6

Offline funkyfive

  • I live here
  • *****
  • Posts: 595
Re: Lowering debate
« Reply #68 on: 14 July 2009, 07:49 »
Good advice Joe. I will give it a go on Saturday.
Logged

Offline Jimp

  • I live here
  • *****
  • Posts: 2,321
Re: Lowering debate
« Reply #69 on: 14 July 2009, 20:47 »
Just wondering before I get coilovers, what does changing the top mounts for VR6 top mounts actually do? Are the stiffer or something? thanks  :smiley:
Logged
Not low enough mk5
Not on the road enough mk3
Pages: 1 ... 5 6 [7] 8
« previous next »