Author Topic: vr6 timing (Read 1166 times)

JONESY16V · « **on:** 18 June 2009, 12:40 »

is there any one out there that can help me with timing marks on a vr6 ? like where they are and how to set it up ? as i think mines jumped a tooth because of loose chain !! help

VRDan · « **Reply #1 on:** 18 June 2009, 19:22 »

At the top of the Crank pulley there is a notch on outer edge i think, that lines up with another notch on the block/back cover. You will have to remove the inlet manifold to get the rocker cover off to check the cams, They have nothes cut in the end that are offset so a locking tool or something (i used side of spanners) can only be put in one way to lock them in place.

Hope this helps

VRDan · « **Reply #2 on:** 18 June 2009, 19:29 »

http://forums.vwvortex.com/zerothread?id=1264409

This is a very good guide i have used in the past

AudiA8Quattro · « **Reply #3 on:** 19 June 2009, 00:08 »

The slots in the end of the cams need to be dead horizontal.

see
http://vwpolo2000.proboards.com/index.cgi?board=howto1&action=display&thread=141

JONESY16V · « **Reply #4 on:** 19 June 2009, 10:28 »

cheers your a star

GolfGTIforum.co.uk

Author Topic: vr6 timing (Read 1166 times)

JONESY16V

vr6 timing

VRDan

Re: vr6 timing

VRDan

Re: vr6 timing

AudiA8Quattro

Re: vr6 timing

JONESY16V

Re: vr6 timing