update, H valve fitted

[Wazzzer]

Guys help me, I've just been out fitting my new pollen filter and thought I'd put the N75 J back to how it should be and disaster...it broke in half!

now this leaves me with a massive dilemma, how the hell do I get to work on Monday!?!

Does anyone know if it can be bypassed as a temporary measure until I can order a new one?

Please help, I'm gonna try and glue the plastic back together but I don't see it holding very long 

[james2]

train or a bus

[Wazzzer]

trains haven't run in Newport since the 1800s and there isn't a bus to where I work at 5.30, try again

[dai-cymru]

put a blanking plug in, it will run without an n75 on a temp basis

[Wazzzer]

yeah just wondering which pipe to block off and what ones to join together?

[dai-cymru]

yeah just wondering which pipe to block off and what ones to join together?

dont blame me if it damages anything but when i did mine, i joined the 2 small ones together and blanked the Intake pipe

[Wazzzer]

I may have another solution, my mate is lending me his bleed valve, gonna connect it up and wind it right in so I can at least use it. Thanks for your help, I might end up doing it that way if the valve doesn't fit 

[dai-cymru]

I may have another solution, my mate is lending me his bleed valve, gonna connect it up and wind it right in so I can at least use it. Thanks for your help, I might end up doing it that way if the valve doesn't fit 

cool hope it gets you going, i got an n75 f in my glove box bt a bit far to the isle of wight to get it to borrow

[Wazzzer]

appreciate the offer, I'm ordering an H on Monday though

[Wazzzer]

just connected the bleed valve up and it's running 4psi, but it runs