BIG Master Cylinder

[gti8v-irv]

hi there, just wondering if ne1 could help with this? im upgrading my 8v brakes to 280mm wiv Audi S2 twin pots i already have got a new 22mm master cylinder but have just seen in an old Golf+ mag that there r VW 24mm master cylinders on coraddo and passats with ABS. does ne1 know if the 24mm master cylinder from the coraddo or passat would fit a 90spec 8v servo? i know you can use the 16v/G60 22mm master cylinders but not sure if these ones fit. ne1 know bout this?

[danny_p]

golf 3 abs has 23.5  mm i think,

i'm going for seat cordoba  whitch is 23.5mm but ali and 0.6kg lighter    both cyls require modifying brake lines at cylinder end for bigger unions

[gti8v-irv]

do you know if you can you just change the fittings on the end of the brake lines or do you hav 2 replace part of them?

[danny_p]

 you can cut tbhe flare offf and put the other union on and reflare the steel line if you have a gd tool and some luck.   but tbh just replace them it's easyer

[gti8v-irv]

ne1 else know nefing about corrado or passat 24mm master cylinders? would they fit a golf servo?

[danny_p]

iirc they bolt up but not in a useful way as the tank dosent end up upright