Using a Gti head with carbs.........filling the injector holes?

[moonsta]

  does anyone know how you fill the holes where the injectors go if i want to use a Gti head on my latest 1600,wasa told that TSR used to do something?? Any idea's anyone?? Cheers gang

[DarnPB]

Araldite some penny coins in there, but don't tell the treasury. You will get into trouble for defacing the head of the Queen!

[Khare]

Araldite some penny coins in there, but don't tell the treasury. You will get into trouble for defacing the head of the Queen!

depends what head. If its a K-Jet head then you can use pennies but you cant on a digi head.

[danny_p]

depends on how old thw digi head is. per 90  penny trick work it seems

[rubjonny]

leave the injectors in is one way, and gearbox drain/fill plugs fit, though again this depends on the injector hole size as above

[rodz22]

weld the holes up a permanent solution !!!!!!!!!!!

[danny_p]

welding the holes is suboptimal.   tapping and screw in a threaded bung with threadlock if you must.

[moonsta]

 It's an early k-jet head.......

[danny_p]

take seats out add pennys  replace seats as  darnPB said

[Wayne]

It's an early k-jet head.......

On the early k jet head, gearbox drain plugs will do the job.